Page 327 - Icon Ridge Presents ORION

Coolants and lubricants \ Jointed coolant hoses
Jointed hose system set
Stainless steel jointed hose systems

Application:  Ident. No. 450–456: fork wrench SW 20 included
Basic set for setting up an individual coolant system.
Advantage:
Execution:  universal, expandable screw system
 made from rust-free stainless steel (1.4301)  will not push away due to pressure, vibration or
 suitable up to at least 40 bar operating pressure chips
 with short combinations, positive operating pres-  extremely long service life, resistant to corrosion
sures up to 80 bar are possible  resistant to temperature and chemical substances
 SW 11 and 16 width across fl ats on 6-mm system  absolutely rigid and individually adjustable thanks
 Clamping width 14 and 20 across fl ats on 8.8-mm to screw coupling
system
System design 6 mm 8.8 mm
Length (mm) Composition of set 18300... 18300...
Ident. No. Ident. No.
150 Round nozzle dia. 4.5 mm, 3 x 25 mm spacers, 1 x 40 mm spacers, 1/8” adapter 410 - -
150 Round nozzle dia. 4.5 mm, 3 x 25 mm spacers, 1 x 40 mm spacers, 1/4” adapter 412 - -
225 Round nozzle dia. 4.5 mm, 6 x 25 mm spacers, 1 x 40 mm spacers, 1/8” adapter 406 - -
225 Round nozzle dia. 4.5 mm, 6 x 25 mm spacers, 1 x 40 mm spacers, 1/4” adapter 408 - -
365 Round nozzle dia. 4.5 mm, 10 x 25 mm spacers, 2 x 40 mm spacers, 1/8” adapter 402 - -
365 Round nozzle dia. 4.5 mm, 10 x 25 mm spacers, 2 x 40 mm spacers, 1/4” adapter 404 - -
230 Round nozzle dia. 8.8 mm, 6 x 37 mm spacers, 1/4” adapter - - 454
230 Round nozzle dia. 8.8 mm, 6 x 37 mm spacers, 3/8” adapter - - 456
325 Round nozzle dia. 8.8 mm, 8 x 37 mm spacers, 1 x 80 mm spacers, 1/4” adapter - - 450
325 Round nozzle dia. 8.8 mm, 8 x 37 mm spacers, 1 x 80 mm spacers, 3/8” adapter - - 452
Prod. Gr. 1FH
Ball valve
For stainless steel jointed hose systems
Application:  Clamping width 14 and 20 across fl ats on 8.8-mm system
For blocking and regulating the coolant fl ow.
Advantage:
Execution:  extremely long service life
 suitable up to at least 40 bar operating pressure  resistant to temperature and chemical substances
 connecting thread to fi t every machine  fully rigid and individually adjustable thanks to screw coupling
 SW 11 and 16 width across fl ats on 6-mm system
Outer thread dimension Inner thread dimension System design 18300...
Ident. No.
G 1/8 inch G 1/4 inch 6 mm | 8.8 mm 442
G 1/4 inch G 1/4 inch 6 mm | 8.8 mm 444
G 3/8 inch G 1/4 inch 6 mm | 8.8 mm 446
G 1/2 inch G 1/4 inch 6 mm | 8.8 mm 448
Prod. Gr. 1FH

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 327

0710_EN_2018_KERN[21847763]-u.indd 712 12/17/2018 3:34:06 PM