Page 366 - Icon Ridge Presents ORION

Tool clamp \ Morse taper arbours and ejector drifts

Drill chuck
Self-clamping

R
Application: Execution:
For clamping and releasing drill bits quickly without  Drill chuck and mounting taper form one unit
a key.
Advantage: A
 Very good value for money

Min./max. clamping width 1-13 mm 1-13 mm 1-13 mm 3-16 mm 3-16 mm 3-16 mm
Morse taper size MK 2 MK 3 MK 4 MK 2 MK 3 MK 4
A (mm) 95.5 95.5 98 100.5 100.5 102
Outer Ø (mm) 50.5 - - - - -
21316... Ident. No. 020 030 040 220 230 240

Prod. Gr. 295
Morse taper arbours ( DIN 238 )
With morse taper for drill chucks
Application: Execution:
For holding drill chucks.  Hardened and polished
 Drill chuck holders with steep taper, see no. 23272
Ident. No. 101–162, 164–224

Drill chuck Morse taper Min. taper Max. taper 21269... Drill chuck Morse taper Min. taper Max. taper 21269...
taper size external Ø external Ø Ident. No. taper size external Ø external Ø Ident. No.
(mm) (mm) (mm) (mm)
B 10 MK 1 9.4 10.095 101 B 18 MK 1 16.2 17.78 181
B 10 MK 2 9.4 10.095 102 B 18 MK 2 16.2 17.78 182
B 12 MK 1 11.1 12.06 121 B 18 MK 3 16.2 17.78 183
B 12 MK 2 11.1 12.06 122 B 18 MK 4 16.2 17.78 184
B 12 MK 3 11.1 12.06 123 B 18 MK 5 16.2 17.78 185
B 16 MK 1 14.5 15.733 161 B 22 MK 2 19.8 21.793 222
B 16 MK 2 14.5 15.733 162 B 22 MK 3 19.8 21.793 223
B 16 MK 3 14.5 15.733 163 B 22 MK 4 19.8 21.793 224
B 16 MK 4 14.5 15.733 164
Prod. Gr. 207

Ejector dri s for tapered tools with flat tangs ( DIN 317 )
Application: Execution:
For driving out taper shanks in accordance with DIN  Made of special steel
228 with fl at tangs.  Hardened
 Tempered with burnished fi nish

Suitable for morse taper
tools MK 0 MK 1 | MK 2 MK 3 MK 4 MK 5 | MK 6
Length (mm) 90 140 190 225 265
21160... Ident. No. 005 010 030 040 050

Prod. Gr. 207

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 366

0799_EN_2018_KERN[21849994]-g.indd 800 12/17/2018 3:34:06 PM