Page 388 - Icon Ridge Presents ORION

Workpiece clamping \ Technical introduction – quick-action clamps

AMF quick-action clamp
The features of our quick-action clamp at a glance
the characteristics of our quick-action clamp at a glance
 ergonomic 2-component handle
 safety clamping piece with fi nger protection
 protection against the loss of pressure screws
 stainless steel rivets
 removable rubber cap
 Ergonomic 2-component handle  Stainless-steel rivets
 Safety clamping piece with fi nger  Removable rubber cap
protection
 Protection against the loss of pressure
screws
① Ergonomic 2-component handle with a high degree of
1 operating comfort due to large hand surface. The grippy
surface made of so components is connected with the

hard base material sitting fi rmly on the clamp.
② Safety clamp with fi nger protection and integrated
stop to which there is no access.

③ Protection against the loss of pressure screws.
For subsequent insertion of pre-assembled pressure
2 5 screws.
④ Pressure screw (8.8) can be quickly adjusted using the
nut washer in tensioner arm.
6
3 ⑤ Stainless-steel rivets in case-hardened bushings. All
bearings greased, for durable, consistent functionality.
4 ⑥ The opening angle can be changed by pressing in a stop
pin.
7 ⑦ Pressure screw with removable rubber cap.

Quick-action clamp with coloured handles available
on request.

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 388

0916_EN_2018_KERN[21850169]-q.indd 917 12/17/2018 3:34:48 PM