Page 20 - GoPro Manual

/ Set Up
DEFAULT MODE AT POWER UP
You can set the camera’s default mode at power up to any of the following modes:
/ Set Up
ONE BUTTON
Video (default)
Photo
Burst
Time Lapse
With One Button mode selected, the camera automatically begins recording when powered on.
OFF (default) ON
Note: One Button mode is disabled when the camera is connected to the Remote (sold separately) or the GoPro App.
To Turn On One Button Mode:
In Setup, set One Button to ON. For details about how to change a setting, see Set Up earlier in this section.
To Capture Video or Time Lapse with One Button Mode:
With the camera powered off, press and release the Power/Mode button [ ]. If the default mode is set to Video, the camera automatically powers on and begins capturing video. If the default mode is set to Photo, Burst or Time Lapse, the camera automatically powers on and begins capturing Time Lapse photos.
To Stop Recording:
Press and hold the Power/Mode button [ recording and power off the camera.
] for two seconds to stop
39
38