Page 27 - Multi Mfg Catalog 09-12-2020

VSS‐HP Standard Features

• INVERTER COMPRESSOR  TWO‐STAGE ELECTRIC HEATER

High Efficient, Quiet Inverter Compressor The electric heater is installed on the indoor air
Design. outlet to prevent insufficient air volume and

internal overhea ng.
 NEW CONSTRUCTION AND RETROFIT
 FRESH AIR
Our VSS‐HP is designed to be used as a
replacement unit or for new construc on. The 23” The VSS‐HP has con nuous fresh air drawn into the
X 23“ X 32” footprint and slide‐out chassis make unit through a manually set fresh air vent
change out’s easy.
 FLEXIBILITY
 FREEZE PROTECTION
Our ver cal design save space compared to the
Temperature sensors are on both the compressor tradi onal PTAC units. With an external air duct, one
and evaporator that will signal the unit to stop if it unit can supply condi oned air to several rooms.
begins to freeze.
 SUPERIOR TEMPERATURE CONTROL

 SELF DIAGNOSTIC Microprocessor controls are programmed to

interface with the temperature sensors to maximize
Our VSS‐HP will perform self diagnos cs and display
comfort condi ons for the room occupant.
error codes.

 DUAL FAN MOTORS  POWER FAILURE

Any units se ng prior to a power outage are
ALL VSS‐HP units have two fan motors that operate
memorized and will resume a er the power restarts
quietly and with maximum efficiency. These motors
are permanently lubricated to reduce maintenance  FRONT DESK CONTROL
and enclosed to keep put dirt and water
The VSS‐HP has available Front Desk Control.
 RAPID HEAT MODE

The unit will operate in electric heat mode to quickly

raise the temperature of the room. When the
temperature is met, the unit will operate in standard
heat pump mode.

 QUIET OPERATION

The brushless DC motor design operates quietly with
a stepless configura on.