Page 9 - Alfwaress, Aileen, Feature Article (1)
P. 9
6 Step Tack Box Craft
1. 2. 3.
You will start off by getting Then, lay one of the slabs Next with your remaining 2
five 6 inch x 17 inch long flat on a surface, and get 2 slabs of wood, you will cut
slabs of wood. They should other slabs. With those 2 part of the top in a
look like this: slabs you will screw them triangular shape and screw
on to the sides of that faced in a medium sized hole at
⇩ ⇩ make sure that you don’t
down slab.. It should look
the top, the size you want
your handle to be. Just
like this:
screw all the way through.
This slab of wood will then
be screwed onto the end of
your box, triangle side
facing up. The cut should
look like this:
4. 5. 6.
After all those steps, your Your next step will be to Once finished getting the
tool box should be looking create a handle for your handle, place it on the
like this but with holes on tool box. Get a skinny 16.5 upper part of your box into
the triangular shaped inch long metal bar (Can Be the holes that you screwed
areas: Wooden), which should in before. It should look
look like this: like this:
9
Then you have your tack box!
