Page 18 - 2020 US Harris Letters 11-2-20

DF Tape – available in aluminum up to 6”high – included in 1/8”price NO FULL Coverage
Mounting Options
Go to GeminiSignProducts.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Flat Cut Metal > Installation)
PATTERN & STENCIL options are in LAYOUT code
Plain Mount
Letters and logos are supplied with no mounting holes or hardware. Note: Most metal finishes do require some processing holes on letters backs - even with Plain mounts
3A - Double Rail Mount
Add 35% to brushed letter price. Includes two flat 1/4” painted rails. Letters pre-assembled to rails. Typical with 4” - 24” letters. C-channel and anodized finish optional
Double Face Tape Mount
Stud Mount
Backs of letters and logos, at least 1⁄4”thick, are drilled and tapped to receive threaded studs, for mounting to wall. Optional alignment for brick, block or rails.
3B - Bottom & Top Rail Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick Includes painted or anodized aluminum rail. Letters over 8” may require tie-back (not supplied).
Stud Boss Stud Weld
Welded Stud Mount
Backs of 1/8”thick letters and logos are supplied with welded stud bosses (to receive studs) or 1” long welded studs, for mounting to wall.
3B - Bottom & Top Stud Mount
Add 15% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 8” may require tie-back (not supplied).
Single Rail Mount
Add 35% to brushed letter price. Includes one flat 1/4” painted rail. Letters pre-assembled to rail. Typical with 4” - 8” letters. C-channel and anodized finish optional.
CAD DRAWING
1. Select Option in C-METAL RAILS
3D - Bottom Angle Bracket Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 12” may require tie-back (not supplied). Angle bracket has a painted finish and optional anodized finish.
CAD DRAWING
CAD DRAWING
1. Select Option in C-METAL RAILS
Some letters or logos 8” or smaller can have full coverage, 20 mil. clear double face tape. Some larger letters and logos can have strips of the same tape applied. Email for quote.
16
1.800.538.8377
1. Select Option in C-METAL RAILS
2. Enter separate line item H3SRAIL (Single Rail) Qty:1 H3DRAIL (Double Rail) Qty:1
2. Enter separate line item
H3TRAIL (TOP Rail) Qty:1 H3BRAIL (BOTTOM Rail) Qty:1
Note: DF Tape metal limit rules are the same as 2019 (for now).
Aluminum – max. 6”high. All other metals – max. 4”high
Product manager will advise on availability of full coverage on metal and clear tape.
CAD DRAWING
1. Select Option in MOUNT GROUP
2. 1/8” thick back
a. Select mount option
b. Enter separate line item H3TSTUD (TOP Stud) Qty:1 H3BSTUD (BOTTOM Stud) Qty:1
2. Enter separate line item H3ARAIL Qty:1