Page 71 - DMcatalogue2017

Low voltage AC drives

Other variants

ACS800 – Common user interfaces

Control panel Typical I/O and control connections
The control panel features a The ABB industrial drive family uses the same control card,
full-text multilingual display. keypad and software structure throughout its entire range.
Dedicated keys allow fast Analogue and digital I/O channels are used for different
access to actual signals, functions such as control, monitoring and measurement
parameters, assistant functions purposes (e.g. motor temperature). In addition, optional I/O
and drive information. The panel extension modules are available providing additional analogue 4
can be used for parameter or digital I/O connections.
copying and for configuring
adaptive programmes, working Below are the standard drive control I/O of the ABB industrial
as a PLC inside the drive. Local drive with factory macro. For other ACS800 application
motor control and parameter macros the functions may be different. Please refer to the
copying is also possible. firmware manual for details.

X20
Panel mounting kits 1 VREF- Reference voltage -10 VDC,
Kits are available that allow 2 AGND R L > 1 kohm
mounting on the cabinet door, X21
or in a holder inside the cabinet. 1 2 VREF+ Reference voltage 10 VDC,
R L > 1 kohm
AGND
The panel can be screwed to 3 AI1+ Speed reference 0(2) ... 10 V, R in >
the cabinet door, without the 4 AI1- 200 kohm
need for an additional holder. 5 AI2+ By default, not in use. 0(4) ... 20 mA,
6 AI2- R in = 100 ohm
7 AI3+ By default, not in use. 0(4) ... 20 mA,
Fieldbus 8 AI3- R in = 100 ohm
The ACS800 supports an rpm 9 AO1+ Motor speed 0(4)...20 mA = 0...motor
^
extensive list of fieldbus 10 AO1- nom. speed, R L < 700 ohm
^
A 11 AO2+ Output current 0(4)...20 mA = 0...motor
modules for connectivity to 12 AO2- nom. current, R L < 700 ohm
industrial networks. X22
1 DI1 Stop/Start
2 DI2 Forward/Reverse
I/O expansion 3 DI3
ACS800 can be fitted with a 4 DI4 By default, not in use.
Acceleration & deceleration select
large range of analogue and 5 DI5 Constant speed select
digital I/O modules to expand its 6 DI6 Constant speed select
I/O capability. 7 8 +24VD +24 V DC max. 100 mA
+24VD
9 Digital ground
DriveWindow - PC Tool 10 Digital ground
DriveWindow is a high 11 Start interlock (0 = stop)
Power supply
X23
specification, high speed 1 Auxiliary power supply output, non-isola-
commissioning, maintenance 2 ted, 24 V DC 250 mA
and monitoring tool for the X25
ACS800 drive range. It operates 1 2 Relay output 1: ready
over an optical fibre link. (Drive 3
requires an RCDO module) X26
1 Relay output 2: running
2
DriveAP - PC Tool 3
DriveAP allows access to the X27
ACS800 adaptive, block 1 Relay output 3: fault (-1)
programming environment. 2
3

Drives and controls, motors and mechanical power transmission catalogue 71