Page 88 - Catalogue_2019 INSIDE_HD_Classical

sur gic aL ins tr um ent s

Driver 2.42 mm
Driver 2.42; with hex/square Ratchet connection 7 mm CT-S207
Driver 2.42; with hex/square Ratchet connection 10 mm CT-S210

Driver 2.42; with hex/square Ratchet connection 15 mm CT-S215

Driver 2.42; with hex/square Ratchet connection 18 mm CT-S218
Length
Motor Mount 2.42 Hex. 20 mm CT-0252
Motor Mount 2.42 Hex. 28 mm CT-0254

* For installation of implants at the implant level or at the abutment level in premium packages
where the driver interface with the internal hex of the connector abutment CO-8036.
* The implant insertion with the motor-mount driver should be 30 rpm or less.
* Notice: the hexagon position of the driver reflects the position of the internal hexagon of the implant.
* During the insertion try to put the flat part of the hex parallel to the buccal of the bone ridge.

Drivers

Screw Driver Hex Implant Conical Implant Drivers
Driver

1.25 mm 2.42 mm Narrow Regular Wide
Length Cat Number
10 mm CT-D110 CT-H210 MCT-N210 MCT-R210 MCT-W210
15 mm CT-D115 CT-H215 MCT-N215 MCT-R215 MCT-W215
20 mm CT-D120 CT-H220 MCT-N220 MCT-R220 MCT-W220
1.25mm:
* For installation or removal of cover screws, healing caps. abutment screws and multi-unit system components.
* The motor-mount is used with a latch type contra-angle hand piece.
* The implant insertion with the motor-mount driver should be 30 rpm or less.
* Notice: the hexagon position of the driver reflects the position of the internal hexagon of the implant.
* During the insertion try to put the flat part of the hex parallel to the buccal of the bone ridge.

88 sur gic al i ns tr um ent s