Page 4 - PRO AC FC BC REV1 copy

SafeGlide® Aluminum Slide Gates
2" X 4" Exterior Framework
Recommended Stiffener Supplied & Installed by Others
2" Square Interior Diagonals and Verticals
2" x 3" Interior Verticals and 2" Square Interior Diagonals
Standard 1" Square Ornamental Pickets on 4" Gaps
9 GA. Tension Wire for Chain Link
Twin-Track
2" x 4" Exterior Framework
4
Single -Track
End View
5-1/2"
Twin -Track
End View
15"
Single -Track
Top View
Top View
ORNAMENTAL CANTILEVER GATE SAFETY WARNING
SafeGlide Ornamental cantilever gates are supplied with 2" (or less) mesh safety screening in sufficient quantities to cover the entire gate and an equal portion of fence parallel to the gate in the open position up to 6 feet from ground elevation. Also included with each SafeGlide gate are baffle kits used to fill the gaps between posts and the movable gate. These safety components and any other ASTM F2200 safety requirements are the sole responsibility of the installer and must be included when the SafeGlide gate when it is installed with an automatic operator. Pro Access Systems Inc. assumes no responsibility for gate installations that fail to utilize the materials provided or meet the applicable safety standards.