Page 5 - PRO AC FC BC REV1 copy

SafeGlide® Aluminum Slide Gates
Micro-Box
End View
21"
Macro-Box
End View
35"
Top View
Micro-Box
Macro-Box
2" x 4" Exterior Framework
2" Square Exterior Framework
Standard 1" Square Ornamental Pickets, on 4" Gaps
2v Square Interior Verticals, Horizontals and Octagonals
Recommended Stiffener Supplied & Installed
by Others
2" Square Interior Verticals, Horizontals, and Diagonals
2" Square Exterior Framework
1" Square Exterior Diagonals
(Top and Bottom)
9 GA. Tension Wire for Chain Link
1" Square Interior
and Exterior Diagonals
ORNAMENTAL CANTILEVER GATE SAFETY WARNING
SafeGlide Ornamental cantilever gates are supplied with 2" (or less) mesh safety screening in sufficient quantities to cover the entire gate and an equal portion of fence parallel to the gate in the open position up to 6 feet from ground elevation. Also included with each SafeGlide gate are baffle kits used to fill the gaps between posts and the movable gate. These safety components and any other ASTM F2200 safety requirements are the sole responsibility of the installer and must be included when the SafeGlide gate when it is installed with an automatic operator. Pro Access Systems Inc. assumes no responsibility for gate installations that fail to utilize the materials provided or meet the applicable safety standards.
Top View
5