Page 15 - PBL614 IM/SM500F-EN SM500F ( WIRO)
P. 15
SM500F
Field mountable paperless recorder
2.2.3 Pipe-Mounting (Optional)
Note. If removal of knockouts is required, refer to Section 2.3.1, page 15.
Referring to Fig. 2.6, secure the recorder to a pipe as follows:
a Fit two M6 x 50mm long hexagon-head screws through one clamp plate as shown.
b Using the appropriate holes to suit vertical or horizontal pipe, secure the clamp plate to the pipe-mounting bracket using the two M6 x 8mm long hexagon-head screws and two of the spring lock washers.
c Position the pipe mounting bracket into the recesses on the rear of the recorder as shown and secure with the two bracket securing screws. Ensure the plastic washers remain in the positions fitted.
d Secure the recorder to the pipe using the remaining clamp plate, spring lock washers and nuts.
Fig. 2.6 Installing the Recorder – Pipe-Mounting (Optional)
IM/SM500F Rev. AA
13
2 Installation
