Page 59 - Tensionmeter Catalog 2018

D Stationary, electronic S C H M I D T
FS Series
c o n t r o l i n s t r u m e n t s

Tension sensor - single roller system - for Tension sensor for wires, ropes and cables
installation at an existing deviating pully up to max. 10 mm Ø
Model FSR For thin wires Model FSW

5 Tension ranges from 0 - 10 N and ropes 3 Tension ranges from 0 - 20 daN Big guide rollers
to 0 - 200 N to 0 - 100 daN 60 mm Ø, minimizes
material deflection

Model FSW-100K

Model FSR-10N
Special features: Special features:
 Entry angle and exit angle αmin 20° (must be constant)  Guide rollers 60 mm Ø, available with V- or U-groove
 Apart from that the instrument relates to model FS1  Depending to the material to be measured the dimensions of
the sensor can be modified
Nominal
Available Models  Apart from that the instrument relates to model FS1
Calibration Material*
Head Width*
MODEL Load FN
N Available Models Tension Ranges Measuring
FSR-10N 0 - 10 SCHMIDT
FSR-20N 0 - 20 MODEL daN mm
FSR-50N 0 - 50
FSR-100N 0 - 100 FSW-20K 0 - 20 550 steel rope 1.5 mm Ø
FSR-200N 0 - 200 FSW-50K 0 - 50 550 (7 x 7 x 0.25)
steel rope 1.5 mm Ø
Line Speed Roller Material (6 x 7 x 0.50)
v max. ... m / min
steel rope 1.5 mm Ø
Guide Rollers Roller Diameter  see page E  FSW-100K 0 - 100 550 (6 x 7 x 0.30)
V-grooved mm Other tension ranges available on request.
Standard 4000 30 Hardened steel Other units of measure available, such as g.
* Outside dimensions of front plate
Code R1 4000 30 Hard-chrome plated steel
v max. ... m / min
Code F 4000 70 Hard-coated aluminium Guide Rollers  see page E 

Code FB 4000 70 Tempered steel Line Speed Roller Material
Code B6 2000 30 Hardened steel V-grooved
Code B10 2000 30 Hardened steel Standard 2000 Hard-coated aluminum
max. wire diameter 5 mm
For determine the tension range, please
α send us the following information: U-grooved
• Line tension Fz 2000 Hard-coated aluminum (Radius R 5)
F Z Code R 2 22
• In- and outcoming angle α 2000 Hard-coated aluminum (Radius R 8)
Code R 3 22
• Mounting position
• Desired guide roller
F N Special calibration using customer supplied samples is available:
• Application Please supply a sample of at least 5 m in length.
Output Signal Power Supply Specifications Models FSR and FSW same as Model FS 1 (see page D 9 and D 14)
Model with tension range (if not standard) power supply Complete Order No.
Code for output signal /
Code for guide rollers
(if not standard)

To place an order
please indicate the complete model number, e.g.: FSR-100N + R1 + A 3 = FSR – 100N – R1 – A3 D 12