Page 5 - My Report

S. Raw Approved Rly Relevant Inspecting Authority** and Acceptance criteria Supplier’s Verification of material on
No. material specification BIS code extent of inspection responsibil arrival at TPP/LKO
ity
(No.TPP/Store/Material
Verification/01)

6 Silicon TPP/SIC/2017 IS: 11643- Physical test, sampling, Send to As per TPP spec no. 100% Chalan, invoice, verification of
Carbide 1985 LAB for chemical analysis, TPP/SIC/2017, identification on drum, seal,
checking weight, sealing Inspection report in weight and physical
drums jointly and prepare form no. verification of material
inspection report as per TPP/SIC/2017/01 randomly.
standard form no. and chemical test
TPP/SIC/2017/01 report from LAB***

7 Steel TPP/STCH/2017 IS :2062- Physical test, sampling, Send to As per TPP spec no. 100% Chalan, invoice, verification of
Chips 2011 LAB for chemical analysis, TPP/STCH/2017, identification on drum, seal,
Grade checking weight, sealing Inspection report in weight and physical
E-250 drums jointly and prepare form no. verification of material
quality C inspection report as per TPP/STCH/2017/01 randomly.
standard form no. and chemical test
TPP/STCH/2017/01 report from LAB***

(*) The supplier will purchase Aluminum Ingots from NALCO or BALCO or HINDALCO only and manufacture the blown Aluminium power to the approved
specification- TPP/LKO/BAP/2017. The supplier will offer the prepared material as per approved specification- TPP/LKO/BAP/2017 along with copy of

Invoice from NALCO or BALCO or HINDALCO as a proof of purchase of the raw material from these sources.
(**) Inspecting authority shall be authorized representative of TPP/LKO.
(***)Samples shall be got tested at “SHRIRAM INSTITUTE FOR INDUSTRIAL RESEARCH”19, University Road, Delhi for chemical & metallurgical
composition. The cost of all such testing will be borne by the firm only.