Page 41 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05

®
DURO-FLEECE COLORS 50-MIL MEMBRANE

Advantages:
®
®
Duro-Last Duro-Fleece Colors 50-Mil (DFC50)
membrane is an excellent choice for projects requiring
a long lasting roofing membrane. The combination of
fleece and the proven performance of Duro-Last
roofing membrane results in an ideal product for use in
adhered and mechanically attached applications over
a wide variety of roof substrates. A complete line of
custom prefabricated accessories is available for the
DFC50 membrane.
2
Description: R-Value – 0.1 ft ·°F·hr/Btu.
In addition to the fleece, DFC50 membrane Packaging – DFC50 is supplied in the roll sizes
incorporates a weft-inserted, knitted scrim within PVC shown below. A full pallet contains ten rolls.
films to provide exceptional strength and Roll Dimensions:
waterproofing. Dimensions Estimated Coverage 1 Roll Weight
Duro-Fleece membranes must not be used with 10 ft. x 100 ft. 975 sq. ft. 330 lb.
Duro-Last EV membranes. 5 ft. x 100 ft. 475 sq. ft. 165 lb.
1 Assuming 3-inch overlap
PVC Film - Proprietary thermoplastic PVC
formulation of resins, plasticizers, stabilizers, Energy Efficiency:
biocides, flame retardants, and U.V. absorbents. Solar Thermal Solar Reflective

 PVC film above weft-inserted scrim – 26 mil Reflectance Emittance Index (SRI)
Initial 3-yr Initial 3-yr Initial 3-yr
Weft-Inserted Scrim - An 18 x 9 polyester fabric Blue 0.14 P 1 0.89 P 1 11 P
1
construction with weft insertion, composed of 840 x Copper 0.18 P 1 0.89 P 1 16 P
1
1000 denier threads, provides superior tear and Charcoal 0.09 P 1 0.86 P 1 3 P
1
puncture resistance. The polyester thread is treated Green 0.08 P 1 0.88 P 1 3 P
1
1
to prevent wicking. Light Gray 0.43 P 1 0.89 P 1 49 P
1
Fleece - The 3.8-ounce per square yard needle- Patina 0.31 P 1 1 0.89 P 1 1 33 P
1
punched polypropylene fleece provides excellent Light Tan 0.72 P 0.85 P 88 P
1
properties for adhering to, or mechanically attaching P Results pending.
over, a variety of substrates. Each roll of membrane Warranty:
has one selvage edge where the fleece is held back The following warranties are available for projects
3 inches to provide for hot-air welding to the utilizing DFC50 membrane. Contact Duro-Last for
underlying membrane. warranty details. Consequential damage coverage
Total Membrane Thickness – 50 mil, nominal. is not available for Duro-Fleece installations.
Overall Thickness (with Fleece) – 68 mil. Available Warranties
Weight – 0.33 lb. per square foot. Supreme Not applicable for this product
Colors – Same top and bottom surface color. Ultra 15-YR High Wind 20-YR High Wind
* DFC50 is available in the following colors by special order.
Contact sales department for more information. Basic 15-YR NDL 20-YR NDL
Blue Copper Charcoal Green Residential 15-YR Material Only 20-YR Material Only

Light Gray Patina Light Tan

www.duro-last.com 1 of 2 800-248-0280
Duro-Last, “World’s Best Roof”, Duro-Grip and Duro-Fleece are registered trademarks owned by Duro-Last, Inc.
Created: 01/15/2014 Revised: 01/23/2015, 05/18/2015, 02/15/2016, 06/30/2016