Page 190 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 190

4-37





                                                           Go to  Test 4.13
                                                       STOP                                                                                             2006 Softail: Engine Management (Carbureted)
                                               NO           (Part 2 of 2).











                       With ignition ON, measure voltage  between Breakout Box cavity 11 (+)  and cavity 4 (-). With key ON, engine  OFF , voltage must be between 4.2  and 4.95 volts. With key ON, engine  running, voltage must be between  1.5-3.0 volts at hot idle. Does voltage fit specifications?  NO  Replace MAP sensor. See the Softail Service  Manual. Clear diagnostic trouble codes. See  4.5 SPEEDOMETER SELF DIAGNOSTICS.  Road test. Did check engine lamp illuminate  and set Code P0106, P0107 or P0108?  NO  System   now OK.  Clear codes using speedometer self diagnostics. 4.5 SPEEDOMETER SELF DIAGNOSTICS. Confirm proper opera













                         1                                                                                           See   lamp.






             Test 4.13 (Part 1 of 2) MAP SENSOR: DTC P0106, P0107, P0108  YES  Perform 4.7 WIGGLE TEST  to check for intermittents.  Intermittents present?  YES  To identify the source of inter- mittents, start with box marked  by Bold Asterisk under Test  4.13 (Part 2 of 2). Wiggle har- ness while watching DVOM.  YES  Install original MAP sensor.  Replace ignition control module  and road test again to verify.









         HOME
   185   186   187   188   189   190   191   192   193   194   195