Page 230 - 2006 HARLEY FLSTCI SERVICE MANUAL

Table 5-2. Engine Starts Hard SOLUTION CAUSE See charging system trouble- Battery discharged shooting in this section. 5.17 MISFIRE AT IDLE OR UNDER LOAD. 5.17 MISFIRE AT IDLE OR Spark plug wires UNDER LOAD. 5.17 MISFIRE AT IDLE OR UNDER LOAD. See Section 3 in the Softail Service Manual. Drain and refill with fresh fuel. Water or dirt in fuel system Loss of battery power to 5.11 NO ECM POWER ECM terminal 31* * Codes will not clear (although they appear to). 5-11 2006 Softail: Engine Management (EFI)

10.3-13.3 in. Hg Spark plugs Ignition coil 20-50 steps Valve sticking (110-150° C) 2.0-3.5 volts 10-15° 10-15° 13.4 volts
Table 5-1. Typical Scan Values for
HOT IDLE 35-45 kPa 0% 0.2-1.0 volts 1000 230-300° F 0.5-1.5 volts 104-140° F (40-60° C) 2-4 ms 2-4 ms 0 MPH Run 1000

Engine Data MAX. VALUE 104 kPa 5.1 volts 100 4.5 volts 155 5600 464° F (240° C) 5.0 volts 248° F (120° C) 5.0 volts 50 ms 50 ms 50° 50° 120 15 Run 1250 NOTE Hot idle specifications are with stock exhaust, the engine operating at 1000 RPM and an engine temperature of approx- imately 260° F (127° C). Idle settings may be changed with

MIN. VALUE 10 kPa 0 volts 0 0.2 volts 0 800 3° F (-16° C) 0.0 volts 3° F (-16° C) 0.0 volts 0 0 0 0 0 10 off 800 the idle set procedure. See the Softail Service Manual.

ITEM MAP sensor IAT sensor INJ PW front INJ PW rear Advance front Advance rear Battery voltage ENG RUN
HOME TP sensor IAC pintle RPM ET sensor VSS Idle RPM