Page 3 - EX4200 B0B2 CHECK SOP
P. 3

A.  注意項目【Attention Item】
          序號                                                說        明

          No.                                             Description
                確認所有零組件都有安裝組合完成
            1
                Make sure assembly finished and all components had installed.
                先安裝所有治具，再插電源線
            2
                Before install all of the fixtures, don’t plug in power.
                先拉掉電源再移除所有治具
            3
                Pull out the power before remove all of the fixtures.
                如有燒毀等問題，請先拉掉電源再找工程人員
            4
                If any problem with fire burned, please pull out power first then contact with engineer.
                組裝開機前請檢查所有的測試治具是否插好，確認完畢後再開機
            5
                Please check all fixtures are installing right before power on.
                需檢查外觀要正常，包含 LED 燈號的顯示外觀
            6
                Check the surface must is right, include LED lamp display surface is right.



        SOP 適用 EX4200  B0 / B2 / R07 / R08 /R09 所有版本
   1   2   3   4   5   6   7   8