Page 105 - 8170 Money Builder Binder for Owner_Neat

installation and fi nishing EN
3.4 appliance installation and fi nishing
1. Remove the front decorative cover held in place by 2 magnets (Fig. 3-1).

2. With one hand on the glass door to prevent it from falling, remove the 2 screws holding the glass door in place
(Fig. 3-2).

Decorative
Cover

Fig. 3-1 Fig. 3-2

3. Carefully lift the glass door out of the 2 slots in the bottom of the fi rebox (Fig. 3-3). Set the glass door on a
soft, non-abrasive surface.

4. Remove the 4 screws holding the log set in place (Fig. 3-4) then carefully remove the log set. Set the log set
aside (Fig. 3-5) and discard the 4 screws.

Slot

Fig. 3-3

Remove screws from top holes.

Remove screws
from top holes.

Fig. 3-4 Fig. 3-5

11
W415-1980 / B / 06.12.20