Page 49 - CPE E-BOOK ROUGH COPY

Ì
˚

row (far left).

the silent alert mode.

Press K to display the Choose alert menu.
Example of Set-Time Screen
Press K to activate the time and date setting.

From the Function menu, press H to move the cursor to l.
From the Function menu, press H to move the cursor to r.
selection. The P symbol is removed from the Standby screen.
If you move the cursor past the last symbol in the row (far right), it
Note: To exit from any screen without making changes, press J .
Press K to activate your selection. The pager gives a sample of the
Press K to activate the silent alert. The pager vibrates to confirm your
Note: If P is not displayed in the Standby screen, your pager is already in
13
Press H or I to move the cursor to the desired alert. The pager gives
automatically wraps around to the first symbol in the beginning of the same
ALERTS Setting a Silent (Vibrate) Alert alert to confirm your selection. ˝ a sample of each alert as you move through the selections. Ì ¸ ˚ 11 TIME AND DATE SET TIME c12:00AM --/--/-- zv 03:15PM 05/05/97z ˇ
LOCKING MESSAGES from being replaced when memory is full. Up to 10 messages can be locked to prevent them from being deleted or Locking and Unlocking Messages 12 screen) to select an alert pattern. Your pager must be in the audible alert mode (P displayed in the Standby (|). You can also select no message alert (r). seven pleasing alerts (2-8), a chirp alert (j), or a chirp and vibrate alert You can set your pager to alert audible with a stand

Ì
˝
¸
¸
˚
14
alert mode.
Press K.
Press K.
Press K .
the message.

Setting the Alert Pattern
you want to lock or unlock.
indicating the message is locked.
To Lock or Unlock a Message
above while the message is displayed.

From the Function menu, press H to move the cursor to s.

To lock or unlock a message while reading it, follow steps 2 through 4
When a message is locked, the m symbol is replaced by the g symbol
When P is displayed on the Standby screen, your pager is in the audible
Press I to move the cursor to g to lock the message, or h to unlock
From the Message-status screen, press H or I to select the message