Page 6 - Paul N Gardner offerings for Sherwin Williams

8-PATH WET FILM APPLICATORS
Available In Three Film Widths, 2”, 3” And 4”
For laying down wet lms of materials in predetermined thicknesses. These precision wet lm applicators are used
in conjunction with paper charts, hiding power charts, plate glass or any other smooth, at surfaces. They are simple, accurate experimental or quality control devices that require no adjustments.
Film thicknesses deposited may vary from 40% to 80% of the actual clearance.
• Adhesives
• Lacquers
• Waxes & Hot Melts • Board
• Cellulose
• Metallic Powders
• Ceramic Colors
• Oils
•Floor Polishes • Cosmetics
• Pigments •Varnishes •Drers
• Plastics
• Fillers
• Duplicating Inks
• Printing Inks • Emulsions
• Resins
BIRD TYPE FILM APPLICATORS
Stainless Steel Or Nickel Chrome Steel
For laying down wet lms of materials in predetermined thicknesses. These precision wet lm applicators are used in conjunction with paper charts, hiding power charts, plate glass or any other smooth at surfaces. They are simple, accurate experimental or quality control devices that require no adjustments.
Bird Applicator ( Nickel Chrome Plated Steel)
Bird Applicator (Stainless Steel)
Bird Type Film Applicators are available in both STAINLESS STEEL or CORROSION
RESISTANT NICKEL CHROME FINISH. In addition a greater variety of lm widths is available. Any Bird Applicator desired that is not listed in the table will be considered as special, and must be made to order at the price indicated.
Call For Pricing
See Our Complete Line at www.gardco.com
Call For Pricing
Wire-wound Rod Diameter of wire determines amount of coating going through this space or groove
coating
wire coils
WIRE WOUND WET FILM APPLICATOR RODS
substrate to be coated
The Gardco Applicator Rod is a round stainless steel bar tightly wound with stainless steel wire. The diameter of the rod and wire vary in size depending on type of application. The diameter of the wire, in the wound form, regulates the thickness of the coating. During the manufacturing process, tight tolerances are held along with strict quality control. Every item is 100% inspected and individually packaged.
Call For Pricing
rods
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478