Page 7 - Paul N Gardner offerings for Sherwin Williams

FORMED RODS
A formed rod is machined from a solid steel
rod and closely resembles a wire-wound rod. Providing extremely precise metered coatings on lm, tin, rubber, boards, plastics, glass, textiles and more. Listed below are the available diameters of Standard Formed Lab Rods which are 16” overall in length allowing for 12” of effective path.
Advantages
• NO WIRES TO BREAK
Geometry / Pro le • Formed - the grooves have a wide radius at the bottom (like a “U”) • Wire Wound - the“valley” between windings comes to a point • (like a “V”) •
BRESLE PATCH KIT
EASIER CLEANUP Less expensive Uniform spacing
Little change to overall diameter
Call For Pricing
Conductometric Determination Of Soluble Salt Contamination
It is essential that the level of contaminants on a surface is measured prior
to coating in order to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.
Bresle Patches are supplied with Bresle Test Kits and replacement patches can now be purchased for use with existing test kits.
CD-210010.........$399.00
DSP BRESLE CHLORIDE TEST KIT
Features unique Direct Sampling Procedure (DSP) to ensure high speed and accuracy. Up to 60 times more accurate than other test kits available. Also uses a smaller test sample for measurement.
The Bresle Chloride Test Kit includes all the necessary equipment for assessing the level of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit is a conductivity gage used for the assessment of soluble salt ions as chlorides, sulphates and nitrates. The Bresle Kit complies with the ISO 8502-6 and ISO 8502-9 standards, describing the Bresle Method, which states that the conductivity is mainly directly proportional to the concentration of dissolved salts in the solution. ISO 17025 approved certi cate of patches available on request.
CD-910606 ........$599.00
POSITECTOR® SST SOLUBLE SALT TESTER
Measures the Concentration of Soluble Salts on Metal Surfaces
Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940
• Conductivity probe speci cally designed for ISO 8502-6,9 • Displays test duration, sample temperature, conductivity
(μS/cm) and surface density (mg/m2 or μg/cm2)
• Onscreen interface guides users through Bresle test method • Automatic storage of a background (blank) measurement -
handy when performing multiple tests
• Solvent, acid, oil, water and dust resistant - weatherproof • Shock-absorbing, protective rubber holster with belt clip • Two year warranty on gage body and probe
CD-660110 Kit P, PosiPatch Kit with Std Body & Probe..$995.00
CD-660405 Reusable Posipatch (5 Pk)...........................75.00 CD-660431 Replacement Disposable Adhesive Patches (25) +1 needle..............................75.00
Call to con rm Sherwin-Williams discounted pricing for resale.