Page 72 - Sondico Range Brochure 17-18_10mb

72 73

INFORMATION

AFTER CARE OUR SERVICES

Washing Advice Embroidering
Sondico Garments are made using high quality materials under We recommend using a needle size of 70 to avoid splitting fbres. • WICKING A MOISTURE MANAGEMENT SYSTEM
strict quality conditions. It should be noted that most fabrics
discolour due to staining by substances such as mud and grass • QUICK DRYING THAT DRAWS PERSPIRATION AWAY
Customising Your Garment
which may not be entirely removed by washing. • LIGHTWEIGHT FASTER THAN COTTON
Please check your order carefully before printing/embroidery
We strongly recommend removing as much mud from the
garment as possible before soaking/washing. Follow detergent as Sondico are unable to exchange goods after customisation.
manufacturers’ instructions particularly with powders/liquids Sondico will not accept responsibility for goods incorrectly Optivent is the latest innovation in moisture management technology
designed for heavy stains. Avoid products containing chlorine supplied which are then printed or embroidered nor for goods which is built to work with your body to maximise comfort.
bleach that may damage fabrics, trims and decorative. incorrectly printed or embroidered by sources other than Sondico
Professional Ltd.
Soaking garments in water and detergent as soon as possible can
reduce discolouration. Use at least an equal amount of water by Many Sondico garments are manufactured using high quality
volume to that of the garments being soaked/washed. Make sure sublimation print processes. Trained operators should carry out
all parts are fully immersed. Pale kits such as White Yellow and any further process involving inks or heat.
Sky may require more attention and the use of pre-wash soaker’s Sondico is unable to offer advice on the application of decorative
will assist in the removal of stains. products other than those it supplies and will not accept liability
for any damage and/or discolouration attributable to decorative
Do not overfll the washing machine with garments since the ratio
of water to garments is too small, dirt can easily be re-deposited. products applied by others.
This can stain all the garments grey.
Heat Applied Logo/Badges
We do not recommend fabric conditioners on jerseys and shorts
which may cause a build up of flm on fbres. This can prevent • Do not exceed contact temperature of 16 C or 40 seconds dwell
o
the washing process from penetrating flaments and dislodging time since fabrics may shrink and distort.
dirt. However, socks will beneft from fabric conditioners and • Use a suitable protective layer to prevent dyes from re-printing
softeners. Sondico will not accept liability for discolouration or accidentally on other areas.
damage to garments which is attributable to staining caused by
elements foreign to the materials used in manufacture. • Always keep surfaces free from dirt.
• Ensure zip components are not trapped between press surfaces.
Screen Printing
• Protect from heat any fabric that is already printed to prevent
transfer of dyes between fabric surfaces.
• During the process do not allow newly printed fabric areas to
touch other parts of the garment.
• Maximum curing ambient temperature 160 C.
o

SIZE GUIDE

Team Kits Training/Leisure/Benchwear
YS - Chest 66-71cm/26 - 28” Shorts 61cm/24” (Fits Avg 7-9yrs) YS - Chest 66-71cm/26 - 28” (Fits Average 7-8yrs)
YXL - Chest 34-36” Shorts 76cm/30” (Fits Avg 13yrs) YM - Chest 71-76cm/28-30” (Fits Average 9-10yrs)
YL - Chest 76-81cm/30-32” Shorts 71cm/28” (Fits Avg 10-12yrs) YL - Chest 76/81cm/30-32” (Fits Average 11-12yrs)
L/XL - Chest 117-122cm/46-48” Shorts 91cm/36” S - Chest 86-91cm/34-36”, M - 96-102cm/38-40”
Socks (Shoe Size) - Junior 11-1, Youth 2-6, Adult 7-11 L - 107-112cm/42-44” | XL - 117-122cm/46-48”
XXL - 127-132cm/50-52”
AVAILABLE THROUGHOUT THE SONDICO RANGE

RAISE YOUR GAME