Page 105 - Roberston & Sinclair Catalogue

Shank Type Tools
Carbide Tipped Router Bits
LAMINATED AND BEVELING BITS
ACTUAL SIZE REFERENCE
SQUARE BEARING LAMINATE TRIMMER
For laminate trimming. Fitted with a special teflon coated square bearing that won’t stick to or scratch the job.
The 4° angle eliminates filing.
ROUNDING OVER SQUARE BEARING LAMINATE TRIMMER
For trimming of PVC tape on cupboard doors. Fitted with a special teflon coated square bearing that won’t stick to or scratch the job.
Cutter has a 10° lead in angle to eliminate marking.
OD L2
13 6.4 19 15
Od
6.4 6.4
PART NO.
LIN13M4SQ LIN19M4SQ
OD L2 Od
2.0 17 6.4
FLUSH DOUBLE BEARING 1/4 (6.4) SHANK
PART NO.
LINROPB24SQ
FLUSH TRIM PANEL BITS
ACTUAL SIZE REFERENCE
ACTUAL SIZE REFERENCE
FLUSH TRIM PANEL BITS 1/4 (6.4) SHANK
For fast smooth precise flush trim cuts fitted with double shielded ball bearing pilots.
– For heavy duty we recommend LIN16M4B.
– LIN18M8BLR has a soft metal shield over the ball race. The
shield can be reduced so bearing will match cutter diameter after re-sharpening.
These cutters are fitted with two ball race guides. This will reduce marking the job face.
CED CEL
6.4 8.0 6.4 25 9.0 19 9.0 25 13.0 12 13.0 20 13.0 25 16.0 25
BRG
B64 B64 B9 B9 B13 B13 B13 B16
PART NO.
LIN6.4M4BSS LIN6.4M4BLR LIN9M4B LIN9M4BLR LIN13M4BS LIN13M4BS LIN13M4BL LIN16M4B
PART NO.
LIN13M8BSR LIN13M8B LIN13M8BMR LIN13M8BLR LIN18M8BLR
CED CEL BRG
9.0 25 B9 13.0 19 B13 13.0 25 B13
FLUSH DOUBLE BEARING 1/2 (12.7) SHANK
PART NO.
LIN9M4BBLR LIN13M4BB LIN13M4BBLR
PART NO.
LIN13M8BB LIN13M8BBMR LIN13M8BBLR
FLUSH TRIM PANEL BITS (12.7) SHANK
CED
13.0 13.0 13.0
CEL BRG
32 B13 37 B13 50 B13
CED CEL
13.0 25 13.0 32 13.0 37 13.0 50 18.0 50
BRG
B13 B13 B13 B13 B18
KEY OD = Cutting Edge Diameter L2 = Cutting Edge Length (mm) Od = Shank Diameter (mm) L1 = Overall Length (mm)
PHONE 0800 866 546
EMAIL sales@rands.co.nz
WEB www.RandS.co.nz
2-77