Page 104 - Roberston & Sinclair Catalogue

Shank Type Tools
Carbide Tipped Router Bits
EDGE GROOVING AND VEE GROOVING BITS
ACTUAL SIZE REFERENCE
ACTUAL SIZE REFERENCE
INSIDE RADIUS BITS
Unusual cutter for decorative edges with radius. Useful for grooves, finger grips on door and drawer edges. For jointing on curved shapes such as timber boat building with 19mm 3/4” material LINRG268 and LINER208. An ideal male and female joint for thinner material.
PROVINCIAL DESIGN VEINER BITS
Single flute cutter designed to cut vee designs in French provincial cabinets, doors and decorative patterns and cabinets. 4° Bevel; 90° included.
DIA CUTTER HT SHK
31 6 12.7 31 10 12.7 31 12 12.7 39 19 12.7 44 26 12.7
SLOTTING CUTTERS
PART NO.
LINRG68 LINRG108 LINRG128 LINRG198 LINRG268
DIA CUTTER HT SHK
3 10 6.4 5 12 6.4 6.4 16 6.4
ARBOURS AND SPACERS
PART NO.
LINV281 LINV282 LINV283
4 TOOTH EDGE GROOVING CUTTERS
Two flute 1/4” (6.4mm) bore carbide tipped cutters for slotting various sizes. Suitable for plastic and wood tee moulds. Commonly used to clash table edges.
CED KERF HOLE
38 1.5 6.4 38 2.0 6.4 38 2.5 6.4 38 3.0 6.4 38 3.5 6.4 38 4.0 6.4 38 5.0 6.4 38 6.0 6.4
HEAVY DUTY 4 TOOTH SLOTTING CUTTERS
These saws are for larger routers with 1/2” or 1/4” collets. An improved finish is achieved with four teeth. The cutter has an 8mm bore hole.
PART NO.
LINSL116 LINSL564 LINSL332 LINSL18 LINSL964 LINSL532 LINSL316 LINSL14
PART NO.
LINSLX116 LINSLX564 LINSLX332 LINSLX18 LINSLX532 LINSLX316 LINSLX14 LINSL316XX
Suitable to mount flush trim, slotting cutters and three wing moulding cutters.
CED
51
51
51
51
51
51
51
74
KERF HOLE
1.5 8.0 2.0 8.0 2.5 8.0 3.0 8.0 4.0 8.0 5.0 8.0 6.0 8.0 5.0 8.0
DIA LTH SHK
6.4 6 6.4 6.4 19 6.4 6.4 28 6.4 6.4 38 6.4 6.4 28 6.4 8.0 22 6.4 6.4 19 12.7 6.4 32 12.7 6.4 40 12.7 8.0 22 12.7 8.0 35 12.7 6.4 27 12.7
PART NO.
LINVTA4STUBB LINVTA4STD LINVTA4X LINVTA4LR LINVTA4LRX LINVTA54 LINVTA8 LINVTA8X LINVTA8LR LINVTA58 LINVTA8LRX LINVTA58X
KEY OD = Cutting Edge Diameter L2 = Cutting Edge Length (mm) Od = Shank Diameter (mm) L1 = Overall Length (mm)
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
2-76