Page 96 - Roberston & Sinclair Catalogue
P. 96
Shank Type Tools
Routers And Accessories
FACE INLAY BITS INVERTED GUIDE BEVEL BITS
FACE INLAY BITS
To bevel tops oversize prior to moulding bowl cut out. Fitted with Nomark bearing guide. For undercut dovetail bits without bearing refer to dovetail bits.
DIA CUTTER HT BEARING PART NO
Where inlays are required these bits produce a choice of grooves to take veneer, brass, plastic or other strip material.
DIA INLAY W INLAY D BEARING
29 3 1.5 SS4 29 6.4 1.5 SS4 29 12.7 1.5 SS4
PART NO
LINSSM8 LINSSM9 LINSSM10 LINSSM11 LINSSM12 LINSSM13 LINSSM14 LINSSM15 LINSSM16
32 25.4 SS5 LINSSM21
30 27 SS5 LINSSM22
ROMAN OGEE BIT
29 3
29 6.4 29 12.7 29 3 29 6.4 29 12.7
3 SS3 3 SS3 3 SS3 4.5 SS2 4.5 SS2 4.5 SS2
ROUNDING UNDER BITS
Produces shallow Roman ogee bench top edge to retain water on top, usually used in conjunction with SSM24. Rounding over bit to complete the form.
DIA CUTTER HT PART NO
Rounding under bit for bull nose radius. For top cut use roun- ding over bits SSM25 or SSM26. Fitted with Nomark bearing guide.
DIA
58 70
CUTTER HT
19 25.4
BEARING RAD
SS5 13 SS5 19
PART NO
LINSSM17 LINSSM18
PHONE 0800 866 546 EMAIL sales@rands.co.nz WEB www.RandS.co.nz
22 10 LINSSM23
INLAY TRIMMING BITS
For Flush trimming on edges and joints. SS2 fitted with straight Nomark bearing guide. To trim edges of bowl cutout using angle bearing to blend to bowl. SS7 fitted with tapered Normark bearing guide.
DIA CUTTER HT BEARING PART NO
19 26 SS2 LINSSM19
19 26 SS7 LINSSM20
2-68