Page 99 - Roberston & Sinclair Catalogue

Shank Type Tools
Router Accessories
BEARINGS
BALL BEARING GUIDES, CAP SCREWS
Spare bearing for router bits.
SHANK BEARING KITS
Kit includes collar and ball bearing to convert cutter without bearing to a ball bearing guide bit. If cutter and bearing are not the same diameter, make a template to compensate for the variation of the cutter diameter and the bearing diameter.
For example with a 12mm (1/2”) straight cutter and a 19mm bearing, the template is 3.5mm (1/8”) under size all round.
DIA BORE
6.4 3.2 94 12.7 4.7 12.7 6.4 13 4
16 6.4 19 6
19 6.4 19 12.7 22 8 28.5 12.7
No Mark Bearings
17 4
20 6.4
21 6.4
23 6.4 26 6.4 32 12.7
Square Bearings
12.7 4.7 19 4.7
Cap Screw and Nut
3.0mm M4
PART NO.
LINB64 LINB9 LINB127 LINB1274 LINB13 LINB16 LINB196 LINB19 LINB198 LINB22 LINB28
LINSS1 LINSS2 LINSS6 LINSS3 LINSS4 LINSS5
LINB95SQ LINB127SQ
LINCAP LINM4NUT
9.0-15.0 EMAIL sales@rands.co.nz
IN DIA
6.4 12.7 12.7
OUT DIA
19 19 28
PART NO.
LINSBKB19 LINSBKB198 LINSBKB28
PHONE 0800 866 546
WEB www.RandS.co.nz
REBATE BALL BEARING GUIDE SET
The kit is supplied with 6 bearing sizes (9mm, 13mm, 17mm, 21mm, 25mm, 29mm) and using a LINRPB138 rebate router bit, rebates of 15mm, 13mm, 11mm, 9mm, 7mm and 5mm are possible. The bearing can be used on other Linbide routers, for instance rounding over and moulding cutters to adjust the router profile.
DIA
CUTTER HT PART NO.
6 pce
LINRGBK
2-71