Page 3 - Xtrem-Polymers Brochure

Products

Xtrem-Polymers

Xtrem- MARINE KOTE, flexible, one-coat, two components, 100% solids, epoxidic Xtrem-PRIM10, Xtrem- PRIM16 (concrete primer)
novolac ceramic filled coating, providing excellet corrosion and abrasion resistance in sea Xtrem Xtrem-PRIM10 Two component solvent free epoxy primer, used for concrete applications, as
water and marine environments. Xtrem PRIM10 a primer for a < 6% HR on concrete. Specific use as vapour barrier and from out-side
Optioanally: Special wide spectrum crystallized biocide for bio corrosion protection MARINE- Xtrem moisture. Xtrem-PRIM16 conventional use priming systems on normal concrete surfaces
KOTE PRIM16
Xtrem-SUBSEA two component solvent free epoxy coating , tolerant to
moisture and water during the application, can be applied to different Xtrem Xtrem Xtrem-VC, 2-Layer system (primer and veil coat), high performance modified
substrates like metal or concrete. It can be provided for manual (M)or VC novolac vinyl ester coating for concrete protection , where extreme chemical
sprayable application (S). SUB – SEA resistance and very low permeation is required like highly concentrated acid like
The fresh coat can cure in wet conditions and even in the water in different 85% Phosphoric acid, 37% Hydrochorica acid or alkalies, solvents. etc. even in
temperatures. continuous inmersion

Xtrem-ST one coat, two component solvent free epoxy coating Engineered flexible Xtrem-pH C Highly chemical resistant and wear resistant, low viscosity,
tolerant to poor surface treatement, slightly rusted surfaces, etc. Xtrem Xtrem thin film 100% novolac epoxy for aggressive media for concrete
provinding chemical and abrasion resistance to a wide kind of ST composite coatings. protection, i.e. Sulphuirc acid 98%, Sodium Hydroxide 50%, etc. even in
substrates. It can be manufactured for manual (M) or as a sprayable pHC continuos inmersion. No priming is needed on regular and cohesiived
product application (S). Ultimate resins with concrete.

high micro-ceramics
Xtrem-CORR, two component, solvent free, micro ceramic and nano Xtrem-SL
technology filled novalac resin, with outstanding resistance to Xtrem and nano particles 100% solids, advanced reinforced ceramic thin film coating to protect
chemical and crude oil media, against corrosion and abrasion. Xtrem SL metal structures and equipment in extreme immersion services like
Application on different substrates, for high temperature services. CORR technology slurries, mineral processing, etc .for piping and floating cells. Improve
reinforcement the flow of the materials.. Low friction coating
Xtrem-CORR+ two component, solvent free, micro ceramic and nano
technology silanized filled novalac resin, additived with PTFE, for better Xtrem-pHT “premium” coating based in a vinyl ester novolac resin,
lubricity, with outstanding corrosion resistance to chemicals and crude oil Xtrem low VOC content, for chemical expositon to high temperatures,
media, against corrosion and abrasion. Application on different substrates, in Xtrem resistant to thermal cycles, in highly agressive organic acid or alcalies,
high service temperatures up to 150ºC. CORR+ pHt solvents, etc. Very low permeability. On metal surfaces.

Xtrem-HT two component, solvent free, micro ceramic and nano technology filled Xtrem Xtrem Xtrem-pH Specific highly resistant thin film coating to acids like sulphuric acid 98%,
novalac resin, specially reinforced with glass spheres for outstanding resistance to based on a 100 % novolac resin with a amine reacting modified cicloaliphatic curing
chemical and crude oil media, against corrosion and abrasion, with certain isolation HT pH agent.
properties. Application can be done directly on hot surfaces (service crude oil pipes). Specially engineered against chemical corrosion and abrasion for steel tanks,
reactors, pipes, etc.

Complements Xtrem Cleaning solution, de-rusting and phosphating Xtrem Ultimate formula, highly concentrated Xtrem High built two-components special composite, highly
reinforced with SiC (silicium carbide) and nano-
SiC
Chloride
Xtrem-Polymers PASIV solution for metalic surfaces structures. Remover Desaltering/dechlorating solution/foam for s/m particles against high abrasion on different substrates.
metalic surfaces
Two version available: sprayable/roller or spatula.
Storage tanks Off-shore and crude oil industries Waste water treatment plants Gas ducts /scrubbers

Pipes and equipments Chemical Industry Bio-gas Potable water Secondary containment and basins Reactor tanks