Page 25 - 中脉格天产品手册

便携式数控切割机
Portable Numerical control cutting machine

产品特点 Product features

■ P 整体机构自主研发，采用了独特的一体铝合金滑块，拉模而成。避免了切割过程中的抖动断弧现象。
■电机固定座采用弹簧拉紧固定，减少了齿轮在使用过程的磨损。大大提高了齿轮、齿条的寿命。
■ 导轮由传统的 8 个导轨升级成 16 个高转速轴承钢 V 型导轮。提高了设备的整体稳定性。
■主体有横向导轨总成、纵向导轨总成、大溜板三部分组成，安装方便易于调节。
■ 整体滑块安装都由定位销直接定位，对角线安装误差在 0.5mm 以内，微调即可达到理想精度。

■ Noil P is developed independently, with a unique aluminium alloy slipper, which is made of the die. Avoid the dithering in the
cutting process.
■ The fixed seat of the noil motor is fixed by spring and reduces the wear and tear of the gear. The life of gear and rack is
greatly improved.
■ The noil guide is upgraded from the traditional 8 rails to 16 high speed bearing steel V. Improved the overall stability of the
equipment.
■ The main body is composed of horizontal guide rail, longitudinal rail assembly and large slabs, which are easy to adjust.
■ The overall sliding block installation is located directly by the positioning pin, and the error is within 0.5 mm of the diagonal,
and the accuracy is achieved by fine tuning.

切割样品 Cutting samples

逆变焊割设备专业制造商 22
WWW.YTDHJ.COM