Page 13 - Quell-user_manual_update_321

< Contents | Chapter 5: Pain Relief Therapy
Adjusting Intensity During
Therapy Session
Frequent adjustments should not be necessary;
however, if the sensation feels uncomfortable or
is not strong enough, you may make adjustments.
The easiest way to adjust therapy intensity or
to stop therapy is to tap the buttons on the
Dashboard screen in the smartphone app. For
manual adjustments, please follow the directions
below.
click
Decrease Intensity: Click the button. Each click
decreases intensity. Lights will flash and then go
down to indicate intensity has decreased.
Increase Intensity: Press and hold button to
increase the intensity. Intensity increases until
press and hold
you release the button or for a maximum of 20
seconds. If you still need to increase intensity after
20 seconds, hold the button down again.
Quell User Manual Quell Customer Care 1-800-204-6577 or +1-781-890-9989
®
You may adjust intensity as needed at any
time during a therapy session using the
button on the device or the smartphone app.
Optimal pain relief will be obtained at the highest
intensity that is also comfortable.
To learn how to control your Quell device with your
smartphone app, please review Chapter 9.
Ending Therapy Session
Regular therapy sessions will run automatically
60 minutes on, then 60 minutes off, unless you
manually turn off therapy during a session or
recalibrate.
To manually stop therapy during a session, click
the button four times in sequence. You should
not remove the device while it is stimulating, so
make sure that the indicator light is not blinking
white before removing the device and electrode
from your leg. Otherwise you may experience an
uncomfortable sensation when you remove the
device.
After completing a therapy session, you may
either leave the device on your leg or remove
it. If you remove the device, be careful to not
4x
damage the electrode and remember to reapply
the liner (see page 15 for instructions on
removing electrode).
12