Page 27 - K4 PORTFOLIO

08868 - 3M™ rubberized coatings provide stone chip protection. They have excellent sound
deadening and rust preventive properties. They are fast drying and over paintable.
Key features:
• Easily applied using 3M™ 08996 spray gun or 3M™ 16587 HGP system including PPS cup,
liner and nozzle.
• Fast drying / tack free time.
• Weathering, stone chip and corrosion resistant
• Flexible
• Excellent coverage in one coat. No flow
3M™ 08868 can be used to restore textured finishes on new parts or repaired.
panels in the following areas:
- Wheel arches - Front/rear valences
- Side sills - Wings
3M™ 08868 black coating can be used as an undercoating and body coating because it is over
paintable.

• U-POL – US

The 1 US Gallon Raptor Kit is the industry standard in
bedliner coating. Each kit contains four bottles of
Raptor and one tin of hardener. Each kit covers
approximately 125 square feet, enough to do a full-
size pick-up truck bed. Compatible with both
Raptor Schutz and Professional Vari-Nozzle
application guns. Use for automotive, construction,
marine, recreational, industrial, agricultural and
commercial applications.

Primers: -

• 3M – USA
3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and
vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood,
glass, metal and painted metal surfaces.
3M™ Tape Primer 94 is used to improve overall adhesion of tape, film and vinyl
graphics.
Dries in Minutes for Efficient Use, make sure your surface is clean and dry before
applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain
free from contaminants prior to applying the tape. It's important to use the minimum
amount of product necessary as over applying can cause sub-optimal results. Allow
the primer to dry completely, which is usually accomplished in 5 minutes at room
temperature, before applying tape. Special note: porous surfaces may require 2
applications for uniform coverage and good adhesion. Allow your first application of
primer to dry before applying a second coat.