Page 268 - B6118-AEW-XX-XX-PP-A-0001_(P16)_Contractors Manual
P. 268
CONSTRUCT
C1 Shopfront and BWIC
C1.4 Redecoration
All areas which require external redecoration Specific items to be noted during redecoration
must be prepared in the following method: are as follows:
Window frames / doors with sound existing - Spray applied finish to serv-o-slide windows
paintwork: to the drive thru booth. All windows must be
1) Manually abrade with cromadex P180. dismantled prior to decoration to ensure the
2) Degrease with cromadex 678 to remove all spray application is to all visible surfaces when
loose material, oil & grease. windows are in the open position. The inside
3) Apply cromadex 800 2 Pk ISO Free Acrylic face of the service windows will not require
Topcoat Lead free to match MK112E. decoration.
Window frames / doors with damaged paintwork Any low modus sealant joints to be fully raked out
with bare aluminium visible. and residue cleaned from surfaces prior to any
redecoration and replaced with new following
1) Manually abrade with cromadex P180. paint curing period. New low modus sealant to
2) Degrease with cromadex 678 to remove all areas of redecorated khaki green elements to
loose material, oil & grease. be Soudal Silirub Colour Neutral cure Silicone
3) Apply 750 2 Pack Epoxy Primer. RAL Colour 6015/MK112. Alternatively black
4) Overcoat with 800 2 Pk ISO Free Acrylic low modus sealant can be used in this instance
Topcoat Lead free to match MK112E. where prior agreement by the project manager
is obtained, new low modus sealant to areas
All redecoration to works noted ‘khaki green’ of redecorated black elements to be colour
to be undertaken using RAL 6015. All building matched black, contractors choice of supplier.
redecoration must be spray applied.
No over silicone will be accepted.
All works to be carried out as manufacturers External furniture / items (steelwork)
recommendations.
C1.4 Redecoration 2.0 09 February 2017
