Page 173 - Gas Detection Systems Training Manual

Setup
Once the Ethernet network is properly connected and tested, and the SEC 3500 has been assigned a proper static local Ethernet IP address and has been properly tested to have access (it will not respond to pings, though it is accessible through a web browser at its IP address with the proper authentication credentials), the email server is proven to be accessible from the subnet that the SEC 3500 is on and is indeed an SMTP server that responds to a specific IP address PLUS domain name that can be resolved through the Ethernet Gateway, the setup screens may be used to setup the SEC 3500 Email Notification System. Testing of the Email Notification System can be done on the final Setup screen to send test emails to configured contacts AFTER the server settings have been configured and the panel has rebooted itself through ACTIVATION.
Example Setup configured using a real Email Relay Service (JangoSMTP):
Server Manager Name: Server IP Address:
Server Port Number: Server Domain Name: Login Name (fictitious): Login Password (fictitious): Reply Email (fictitious):
Panel Ethernet Settings:
Gateway Address: Panel IP Address: Subnet Mask: MAC Address:
Example Email:
KV023 SEC 3500
209.173.141.250
25
relay.jangosmtp.net
MyJango_SEC
Tud345%78Ftcrow71 MyJango_SCE321@init.jangomail.net
10.100.0.100 10.100.0.233 255.255.255.0 01:23:45:67:89
SEC 3500 Email Notification Basic Setup and Configuration Version 0.1 Draft
September, 2013
Page 5 of 16
Sensor Electronics Corporation
12730 Creek View Avenue Savage, Minnesota 55378 USA 1-800-285-3651