Page 218 - Gas Detection Systems Training Manual

Refreshing SEC 3100 device parameters; Press the “Get Fresh Update” button:
The button changes to “Retrieving...” in yellow, while it is processing the request:
The “Abort ALL!” button may be pressed at anytime to cancel an operation so long as it is still pending or processing. Even if you return to this screen at a later time with a different device, if this last request is still pending “Retrieving” it will show this and allow an abort. Once the process completes, all new parameters are pulled from the SEC 3100 device, fresh from the Sensor head all the way up through to the HMI panel data base.
If necessary, you may also reset a given SEC 3100 device, by pressing the “Reset 3100” button shown above:
This commands the SEC 3100 device to reset- thus causing it to voluntarily go through a warm-reboot cycle. It may take a few minutes before it returns back on-line.
Sensor Electronics Corporation 5500 Lincoln Drive Minneapolis, Minnesota 55436 September 29th, 2006
Page 34 of 66
952-938-9486
SEC 3500 OI Supervisor Operator’s Manual Version 2.1.0095