Page 222 - Gas Detection Systems Training Manual

7.2 Choosing the Coil Map Source
To map the coil, you must first choose the device, zone or global (all) source from the left side of the screen:
Device 25 is selected (shown above). Zone 1 is selected (shown above).
Global (All Zones) is selected.
Once a source is chosen, it is considered temporarily assigned. If this coil had previously been assigned, it can also be un-assigned by pressing the “Un-Assign” button.
Sensor Electronics Corporation 5500 Lincoln Drive Minneapolis, Minnesota 55436 September 29th, 2006
Page 38 of 66
952-938-9486
SEC 3500 OI Supervisor Operator’s Manual Version 2.1.0095