Page 281 - Gas Detection Systems Training Manual

the top-right corner of all screens, when an alarm condition exists. If the icon is pressed, the Global Alarm will be silenced and all “Audible” type Relays and 3100 audible relays will be silenced as well (then the alarm silence icon is removed and the previous contents restored). However, if an alarm condition returns, the Global Alarm will again sound, as well as all defined “Audible” alarms.
If the “Global Latch Reset” feature
on the very same upper-right hand
Summary Screen if a Relay
latch and has entered a latched state, even if the “Audible” silence icon has been pressed (this “Global Latch Reset” button remains in the same location until it is
pressed, and once pressed, provides a status reset showing the current device ID number reset is complete, the icon will return to the further Global Alarm silencing is required).
3.0 First Time Setup/Updating Setup
as the latches are being being reset- once the main SEC logo if no
is enabled, its icon may remain corner of the Main Zone Module coil has been defined to
The very first time you turn on the SEC 3500 with an SEC 3500 Modbus 485 Digital Gas Monitoring loop connected with SEC 3100 Digital Gas Transmitter slave(s) attached, you may have a blank main screen once it is powered up, such as this:
Sensor Electronics Corporation 5500 Lincoln Drive Minneapolis, Minnesota 55436 July 28th, 2007
Page 5 of 49
952-938-9486
SEC 3500 OI Basic Operator’s Manual Version 2.1.0095