Page 212 - 3M ELECTRICAL PRODUCTS CATALOG - 596-PAGES

IronwoodPremium_474114_Catalog-On-Demand.QXD 6/16/2015 11:28 PM Page 213

15 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)

3M™ Cold Shrink MT-C & MT-E

Trifurcating Accessory Kits (One 3/C to
Three 1/C) for 15 kV

3M™ Cold Shrink MT-C and MT-E Trifurcating Accessory Kits are used to
break out and seal a transition from 3/C to three 1/C.
For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT.
Note: Cable sizes shown below are for standard insulation thickness. Medium Voltage Splice Kits,
Final determining factor is cable insulation O.D.

Voltage: 15 kV
Number of Conductors: One 3/C to three 1/C

Order No. UPC Single Conductor Jacket O.D. Kits per Case 5 kV–46 kV
MT-C 051128-55208 0.62”-1.13” (15,7-28,7 mm) 1
MT-E 051128-54318 1.13”-1.80” (28,7-45,7 mm) 1

3M™ Cold Shrink 3/C Inline Shielded, Armored or Non-Armored Splice Kits 5760
Series for 15 kV

These splice kits are designed for splicing shielded armored and non-armored cables, 5/8 kV and 15 kV. Each kit makes one 3/C splice. Connectors are not
included and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Voltage 5/8 kV, 15 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline
Technology Cold Shrink, Resin
RoHS 2011/65/EU Yes

Max. Max. Typical
Order No. UPC Insulation O.D. Range Conductor Size, 15 kV Connector Connector Splice Case
Qty.
O.D. Length Length
5761 051128-59172 0.65”-1.00” 2-3/0 AWG 0.90” 2.75” 29.0” 1
(16,5-25,4 mm) (35-80 mm²) (22,9 mm) (69,9 mm) (737 mm)
5762 051128-59170 0.93”-1.94” Cu: 4/0 AWG-750 kcmil 1.40” 5.00” 44.0” 1
(23,6-49,3 mm) (120-325 mm²) (35,5 mm) (127,0 (1118 mm)
Al: 4/0 AWG-500 kcmil mm)
(120-250 mm²)

PHONE: 800-245-3573 www.3M.com/Electrical 213