Page 359 - 3M ELECTRICAL PRODUCTS CATALOG - 596-PAGES

IronwoodPremium_474115_Catalog-On-Demand12.QXD 6/16/2015 11:58 PM Page 360

Low Voltage Motor Leads, 1 kV and less

3M™ Motor Lead Inline Splice Kits, 1-Hole Lug Connections, 5311–5314

3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of
inline connections at 1000 volts and less. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the
moisture seal.
These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an
inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to
make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs,
can be used.
For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover lengths), to allow space for the splice while the
connection is being made.
Kit contents include
2 (3) Adapter sleeves
2 (1) Inline splice cover
2 (1) Tubes of silicone grease (3 tubes in kit 5314)
2 (1) Instruction sheet

Voltage 1000 V and less
Cable/Shielding Type Single Conductor Non-Shielded Cable
Connection Type Inline (1-Hole Lugs)
RoHS 2011/65/EU Yes

Agency Approval

Feeder Cable Motor Lead Cable Splice Cover Splice Cover Case
Order No. UPC Max. Bolt Length Insulation O.D.
Wire Range Wire Range I.D. Length Qty.
5311 054007- 10-4 AWG 12-4 AWG 1/2” 12-8 AWG: 12-8 AWG: 4”-5” 1
12267 (12,7 mm) 0.17”-0.24” (4,3-6,1 mm) 0.14” (3,6 (101,6-127,0
8-4 AWG: mm) mm)
0.30”-0.36” (7,6-9,1 mm) 8-4 AWG:
0.24” (6,1
mm)
5312 054007- 2-1/0 AWG 4-1/0 AWG 3/4” 0.34”-0.54” (8,6-13,7 mm) 0.30” (7,6 8”-9” 1
12268 (19,1 mm) mm) (203,2-228,6
mm)
5313 054007- 1/0 AWG-250 2 AWG-250 kcmil 1” 2–1/0 AWG: 2-1/0 AWG: 9”-10” 1
12269 kcmil (25,4 mm) 0.40”–0.54” (10,2-13,7 mm) 0.50” (12,7 (228,6-254,0
1/0 AWG-250 kcmil: mm) mm)
0.52”-0.80” (13,2-20,3 mm) 1/0 AWG-250
kcmil:
0.42” (10,7
mm)
5314 054007- 250-500 kcmil 4/0 AWG-500 kcmil 1-1/4” 4/0 AWG-350 kcmil: 4/0 AWG-350 12”-13” 1
Motor Lead Connections kcmil:
12270
kcmil:
(304,8-330,2
0.67”-0.91” (17,0-23,1 mm)
(31,8 mm)
mm)
350-500 kcmil:
0.60” (15,2
0.90”-1.05” (22,9-26,7 mm)
mm)
350-500
0.84” (21,3
mm)

360 FAX: 800-245-0329