Page 465 - 3M ELECTRICAL PRODUCTS CATALOG - 596-PAGES

IronwoodPremium_474117_Catalog-On-Demand2.QXD 6/17/2015 12:37 AM Page 466

Sealants and Packing Material

3M™ FireDam™ Spray 200

3M™ FireDam™ Spray 200 is a sprayable water-based material, that dries to form a tough, elastomeric coating. This material when used as part of an
assembly is intended to firestop building joints, perimeter joints (curtain wall), and through penetration seals. This firestop spray helps prevent the spread
of fire, smoke and noxious gas when properly installed. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 56
when tested in a STC 56-rated wall assembly). Note: when tested at 50% movement for 100 cycles in a 4-inch joint, product remained elastomeric and did
not show signs of cracking.
The coating complies with the current requirements of the International Building Code (IBC), NFPA 5000 and NFPA 101. It has been fire tested and
evaluated for use in construction joints under the pass/fail criteria of ASTM E 1966 (UL 2079), for Perimeter Joints under the pass/fail criteria of ASTM E
2307 and for Through Penetrations under the pass/fail criteria of ASTM E 814 (UL 1479) Standard.

Description Water Based Sealant
Properties Water Based
Fire Barrier 4 Hr Protection; Smoke
Specifications Seal L-Rated; Sound Barrier STC-56
Rated; Elastomeric +-50%

Agency Approvals Intertek; Omega Point Laboratories;
FM Approved; IBC; NBCC; NPFA 5000;
NFPA 101

Order No. UPC Product Name Color Size Case Quantity
FIREDAM200-5G 051115-18797 3M™ FireDam™ Spray 200, Gray, 5 gallon, Pail Gray 5 gal (18,9 l) 1
FIREDAM-SPRAY-5GAL 051115-18798 3M™ FireDam™ Spray 200, Red, 5 gallon, Pail Red 5 gal (18,9 l) 1

3M™ Fire Barrier Packing Material PM 4

3M™ Fire Barrier Packing Material PM4 is designed to be used as an alternative packing material to mineral
wool, fiberglass and backer rod in through-penetration firestop systems. With excellent strength and flexibility
characteristics, it is an ideal through-penetration packing material. PM4 is also non-asbestos, mold resistant,
and inorganic. This installation friendly material is easy to dispense and its compact packaging is optimized
for portability. The smooth textured woven material can be torn by hand, virtually eliminating the need for a
knife.

Description Hand-Tear Dispensed Packing Material
UL 1479 (ASTM E 814) 4 Hr Fire Rating; ASTM E
Fire Protection Products Order No. UPC ICC; BOCA; ICBO; SBCCI Length Width Thickness Case Quantity
Specifications 84; ASTM E 136; ASTM E 814; ASTM C 1338; UL
1479

Agency Approvals

Product Name
20.5’ (6,25 m)
4.0” (10,16 cm)
5
0.5” (12,7 mm)
3M™ Fire Barrier Packing Material PM4
051115-18764
PM4-BULK

466 FAX: 800-245-0329