Page 29 - DP Vol 19 No 2 HR_Neat

Fig 28 Fig 29

Fig 30

Apply a thin layer of ceramic material such as wash brand. Use the we use Opal Effect 1 Pure which will allow the color of the tooth to be
material according to the color you want to achieve; if you have a tooth visible because of because of the translucency.
that is darker, use the appropriate dentin for classic preparations. If the The new glazing system allows us to use the same material for zirco-
color of the tooth is as bright as the desired color, use opaline or neutral nia, E.max Press, refractory, foil platinum, metal-ceramic, etc. - basi-
powders for the firing wash. cally for the whole range of powder ceramics. If we take a closer look at
After the first wash firing, we place the abutments into the printed the fit on the molded abutments after the breakage of a veneer, we will
model and prepare the model for layering. Initially, it is enough to soak see how accurate this technique is (Figure 24).
the dies in distilled water and let them absorb as much water as possi- The final thickness of the veneers is 0.2-0.3 mm. For this case we
ble. Only after this step, layering is started. In this case the patient has used only the Opal 1 powder. For the halo effect we used the Mamel-
a nice bright color and all we want to change is the shape. Therefore, on light powder. The try-in of the veneers and cementation was done

Dental Practice i March-April 2023 i Vol 19 No 2 29