Page 31 - Dickey-john Catalog

A DIVISION OF TSI®
IntelliAg® WSMT2
-0161 Control Harness/-0852 WSMT Harness/ -0201 Accessory Cable
-0852/-0161 use with ACC-WSMT2 and Material Application Modules only
ISOBUS to cab system power harness at rear of tractor or to the implement bar for a pull behind
46798013x
467980201
467980852
46798014X
to WSMB on implement bar
CAN terminator included in 4 channel Implement Dust Plug Kit 467980630
®
Air Cart
NOTE: -0852 and -0161
work with ACC-WSMT2 and material application modules (Do not use with PDC-WSMT2)
467980161
6-pin WP
3-pin WP
(4) 1-pin WP
(3) 1-pin WP
3-pin WP
(4) Feedback Sensors
Liquid/NH3 Flow Meter or Application Rate Sensor
Application Rate Sensor and Couplers
2-pin WP
(4) PWM
HF Valve or
HD 4180TM
(3) pin
WP (3) 1-pin WP Test Switch
467980821S1 ACC-WSMT2
NOTE: Feedback sensors can be either flow meters or application rate sensors
(1) RPM
Radar Cable
(2) Servo
Liquid Servo or NH3 Servo
(1) Hopper (1) Lift
(2) RPM Sensors
(4) Air Press Sensors
(3) Hopper Level Sensors
Level
Switch
1 Imp. Radar
SYSTEM LIMITS
or Electric Pump/ Motor Driver Harness
The ACC WSMT has 4 control channels: * Seeding (lbs/acre)
* Granular (lbs/acre)
* Liquid (gal/acre)
* NH3 (lbs/acre)
SENSORS/SWITCHES
5 Hopper Level 4 Air Pressure
3 RPM
1 Ground Speed 1 Lift Switch
Refer to page 32
for detail on
Electric Pump/Motor Driver Harness
26
5001785 Rev G (202302)
* ACC WSMT will not accept inputs directly from seed blockage sensors. A WSMB module is required accepting 18 rows per module.
Distributed By: Sensor-1 • 202 Main Street, Princeton, KS 66078 • 1-800-SENSOR-1