Page 33 - Dickey-john Catalog

®
Air Cart
A DIVISION OF TSI®
IntelliAg® WSMT2
-0160 Control Harness and -0490 Electric Motor Drive Cable
Each powered lead connects to a 12 volt electric motor (4 maximum)
30 Amp
467980390
F86606352 Relays 40 Amp
467980852
Each PWM lead connects to 1-4 PWM on the -0161 control harness
(4) Electric Motor Driver 467980490
(solenoid relay cable for high current electric motor drive)
to WSMB on
I mplement B ar
46798014X
ISOBUS
15 Amp
46798013x
CAN Terminator included in 4 Channel I mplement
Dust Plug
K it 467980630
to Cab System Power Harness at rear of tractor or to the implement bar for pull behind
467980201
467980161
SYSTEM LIMITS
The ACC WSMT has 4 control channels: * Seeding (lbs/acre) * Granular (lbs/acre) * Liquid (gal/acre)
* NH3 (lbs/acre)
SENSORS/SWITCHES
5 Hopper Level 4 Air Pressure
3 RPM
1 Ground Speed 1 Lift Switch
28
ACC WSMT will not accept inputs directly from seed sensors. A WSMB module is required accepting18 rows per module.
5001785 Rev G (202302)
467980821S1 ACC-WSMT2
NOTE: Feedback sensors can be either flow meters or application rate sensors
Distributed By: Sensor-1 • 202 Main Street, Princeton, KS 66078 • 1-800-SENSOR-1