Page 138 - SAPEM-Chapter-10-2nd-edition-2014

South African Pavement Engineering Manual
Chapter 10: Pavement Design

MAREE, J.H. 1990. Structural Classification of Pavement Structures using Measured Deflection Bowl
Parameters. The IDMP Program. Scott & de Waal Inc, Sandton.
MINISTRY OF DEFENCE. 2011. A Guide to Airfield Pavement Design and Evaluation. Design & Maintenance
Guide 27. Third edition. Construction Support Team, Defence Estates, Ministry of Defence, United Kingdom.
Donwload from http://zemubarek.files.wordpress.com.
NATIONAL ROAD TRAFFIC ACT. 1996.

PAIGE-GREEN, P. and Du Plessis, J.L. 2009. The Use and Interpretation of the Dynamic Cone Penetrometer
(DCP) Test. CSIR Built Environment. Pretoria.

PAIGE-GREEN, P. 2012. Personal Communication on Thornwaite’s Moisture Index. CSIR. Pretoria.
PAIGE-GREEN, P. and Pinard, M.I. 2012. Optimum Design of Sustainable Sealed Low Volume Roads using the
th
Dynamic Cone Penetrometer (DCP). 25 ARRB Conference. Perth, Australia.
PROZZI, J.A., Hong, F. and Leidy, J. 2006. Implementation Aspects of Traffic Characterisation by Means of Axle Load
th
Spectra in the NCHRP Mechanistic-Empirical Design Guide. Proceedings of the 10 International
Conference on Asphalt Pavements. Quebec, Canada.
ROHDE, G.T. 1994. Determining Pavement Structural Number from FWD Testing. Transportation Research
Record 1448, Transportation Research Board, National Research Council, Washington DC, United States of
America.
SABITA. Manual 21. 1999. ETB: The Design and Use of Bitumen Emulsion-treated Bases. Available for
download by SABITA members at www.sabita.co.za.
SADC. 2003. Guideline: Low-volume Sealed Roads. Southern African Development Community. Botswana.
ISBN 9912-0-456-3. registry@sadc.int
SAMPSON, L.R. 1984. Investigation of the Correlation between CBR and DCP. Division of Roads and
Transport Technology, CSIR, Pretoria. Technical note TS/33/84.
SANRAL. 2013. Drainage Manual. 6th - Edition fully Revised. South African National Roads Agency Limited. ISBN
1-86844-328-0. Available for download www.nra.co.za.

SANRAL. 2009. Routine Road Maintenance Manual. Second Edition. South African National Roads Agency
Limited. ISBN 0-620-2568-7.

SARB. 1993a. Guidelines for Upgrading of Low Volume Roads. South African Roads Board. Department of
Transport, Pretoria. RR 92/466/2.

SARB. 1993b. Towards Appropriate Standards for Rural Roads: Discussion Document. South African Roads
Board. Department of Transport, Pretoria. RR 92/466/1
SHACKEL, B. 1979. The Design of Interlocking Concrete Block Pavements. Australian Road Research Board.
Research Report ARR 90.
SHACKEL, B. 1980. The Evaluation and Design of Interlocking Concrete Block Pavements Subjected to
Road Traffic. Technical Report RP9. National Institute for Road Reseach, CSIR, Pretoria.

SHACKEL, B. 1988. The Evolution and Application of Mechanistic Design Procedures for Concrete Block Pavements.
Proceedings of Third International Conference on Concrete Block Paving. Rome.

SHACKEL, B. 1990. The Design and Construction of Interlocking Concrete Block Pavements. Elsevier.
TG2. 2009. Technical Guideline: Bituminous Stabilised Materials – A Guideline for the Design and
Construction of Bitumen Emulsion and Foamed Bitumen Stabilised Materials. Second edition May
2009. ISBN 978-0-7988-5582-2, published by the Asphalt Academy. (available for download on
www.asphaltacademy.co.za)

THEYSE, H.L, De Beer, M., Prozzi, J. and Semmelink, C.J. 1995. TRH4 Revision 1995, Phase I: Updating the
Transfer Functions for the South African Mechanistic Design Method. Division for Roads and
Transport Technology. CSIR, Pretoria, South Africa. National Service Contract NSC24/1.

References and Bibliography
Page 127