Page 85 - PUC 2017 Master Catalog

Copper Quick Disconnect Terminals

Type GHD

• Terminals are designed to provide exceptional electrical and
mechanical performance in demanding applications including
generators, motors, and transformers
• Standard interface allows terminal to mate with existing disconnect designs
• Connectors accommodate industry standard diesel locomotive conductor
sizes from 1/0 AWG to 777 kcmil - widest breadth of product on the market

• Use industry standard tooling with compression dies recommended by Penn-Union
• Design accommodates a wide range of conductor insulation diameters
• Manufactured in the USA from high strength brass alloy
• Silver plated to withstand higher operating temperatures, provide greater
conductivity and protection against corrosion
• Rigorously tested to MIL-SPEC and Industry Standards B

COMPRESSION CONNECTORS C FIG. 1 D C FIG. 2 D C FIG. 3 D COMPRESSION CONNECTORS
I
B
B

A
A
A

FIGURE
CATALOG NUMBER
DIE
LENGTH
I
D
C
AWG
B
CATALOG NO.
STRANDING
GHD-1/0-1 NUMBER DIESEL LOCOMOTIVE CABLE A APPROXIMATE DIMENSIONS (IN.) .66 PENN-UNION WIRE STRIP
GHD-1/0-2 1 1/0 AWG 275/24 3.75 1.00 1.73 1.16 .73 T-70HS 1-1/8”
GHD-1/0-3 .59
GHD-2/0-1 .71
GHD-2/0-2 .69
1 2/0 AWG 325/24 3.75 1.00 1.73 1.16 T-95H 1-1/8”
GHD-2/0-3 .64
GHD-2/0-4 .82
GHD-3/0-1 .81
GHD-3/0-2 1 3/0 AWG 450/24 3.75 1.00 1.73 1.16 .72 T-120H 1-1/8”
GHD-3/0-3 .73
GHD-4/0-1 1 4/0 AWG 550/24 3.75 1.00 1.73 1.11 .81 T-150H 1-1/8”
GHD-262-1 1 262 kcmil 650/24 5.30 1.38 2.60 1.50 1.06 T-150HS 1-7/8”
GHD-313-1 2 313 kcmil 775/24 5.30 1.38 2.59 2.00 - T-240HS 2-1/8”
GHD-373-1 2 373 kcmil 925/24 5.30 1.38 2.59 2.00 - T-240H 2-1/8”
GHD-444-1 2 444 kcmil 1100/24 5.30 1.38 2.59 2.00 - T-300H 2-1/8”
GHD-535-1 2 535 kcmil 1325/24 5.30 1.38 2.59 2.00 - T-400HS 2-1/8”
GHD-646-1 3 646 kcmil 1600/24 5.30 1.38 2.59 2.00 - T-400H 2-1/8”
GHD-777-1 3 777 kcmil 1925/24 5.52 1.49 2.63 2.25 - T-777 2-3/8”

64 65