Page 15 - Demo

TURBOPRIMETM
High Solids Epoxy Primer & Concrete Sealer
An easy-to-mix, easy-to-apply, fast-curing high solids epoxy primer/concrete sealer. It can be used as a fast-cure primer or as a stand-alone concrete sealer. VOC compliant protection against dust, water, mild chemicals, and an easy-to-clean surface.
» Topcoat in as little as 1 hour
» Penetrates deep into the concrete, reducing the risk of outgassing in the topcoat » Excellent primer for 100% solids epoxies
» VOC compliant nationwide
VOC <100g/l COMPLIANT NATIONWIDE
WELL SUITED FOR:
460 1 SQ. FT. HOUR
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
Concrete
Smooth
2 mils / coat 400–460 sq. ft. / gal. 40–85°F (18–32°C) 1–2 hours
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Moderate
Any Rust-Oleum Concrete Saver or Concrete Protection system
Rubber Squeegee and High-Quality 3/8” Nap Roller
DRY TIME:
RECOAT
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
DRY TIME: RECOAT
Concrete
Smooth
4–6.5 mils / coat 175–280 sq. ft. / gal. 65–90°F (18–32°C) 8 hours
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Moderate
Any Rust-Oleum Concrete Saver or Concrete Protection system
Rubber Squeegee and High-Quality 3/8” Nap Roller
PENETRATING PRIME & SEAL
100% Solids Epoxy Primer
VOC <175g/l WELL SUITED FOR:
280 8
This two-component, virtually 100% solids epoxy resin polymer shares the same strong qualities of our Prime & Seal Primer. Designed for covering worn concrete, our penetrating formula seals small voids and pinholes to reduce bubbles in the topcoat.
» Low viscosity formula penetrates deep into concrete to reduce the chance of outgassing in the topcoat
» The bond strength to the concrete will exceed the tensile and shear strengths of the concrete itself
» Excellent primer under 100% solids epoxies
» Promotes adhesion of 100% solids epoxies in industrial environments
Reduce risk of bubble formation
COLORS/PRODUCT NUMBERS:
New or old bare concrete floors
COLORS/PRODUCT NUMBERS:
241099 Base 241200 Activator
237354 237363 237369
Natural
Light Gray Super Light Gray
SQ. FT.
HOURS
14