Page 16 - Demo

DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
237333 237342 237369
Natural
Light Gray Super Light Gray
DRY TIME:
RECOAT
Concrete
Smooth
8–16 mils / coat 100–200 sq. ft. / gal. 65–90°F (18–32°C) 8 hours
Moderate
Any Rust-Oleum Concrete Saver or Concrete Protection system
Rubber Squeegee and High-Quality 3/8” Nap Roller
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
DRY TIME: RECOAT
Concrete Burnished
4 mils / coat
200 sq. ft. / gal. 65–90°F (18–32°C) 8 hours
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Moderate
Any Rust-Oleum Concrete Saver or Concrete Protection system
Rubber Squeegee, Pump-Up Sprayer, High-quality Roller Cover
SURFACE PREP
PRIME & SEAL
100% Solids Epoxy Primer
This two-component, 100% solids epoxy resin polymer seals the substrate and securely bonds it to the floor coating or patching materials. May be used before applying floor coatings, toppings, patching materials, or alone as a concrete sealer.
» Exceeds the tensile and sheer strength of the concrete, and cures in only 6-8 hours » Excellent adhesion to concrete, brick, tile and many other building materials
» Extends the life of the topcoat
VOC <100g/l 200 8
GREEN CONCRETE
Prime & Seal Primer
VOC 0g/l COMPLIANT NATIONWIDE
200 8
Combines the functions of a curing agent, sealer and permanent primer — all in one.
It can be applied up to 8 hours after pouring the slab1 and is ready for topcoating after only an additional 8 hours of dry time.
» Applies easily, dries quickly, and does not have to be removed prior to recoating like traditional sealers
» Go from green concrete to a finished floor in less than 48 hours
» Wide topcoating window — same day or up to 28 days
» Strengthens concrete
» Eliminates the cost of shot blasting, estimated at $.30-.50 per square foot
» Carpet, tile and floor coatings can be applied directly on cured floor
» Passes the test for use as a Concrete Curing Compound (ASTM C156-98 for Water Retention)
WELL SUITED FOR:
1 Green Concrete can be applied as soon as concrete can be walked on without marring (typically 4–16 hours post pour depending on environmental conditions).
15
WELL SUITED FOR:
Use before floor coatings or toppings, before patching materials
COLORS/PRODUCT NUMBERS:
New construction, plant renovations
COLORS/PRODUCT NUMBERS:
237535 Base 237539 Activator
SQ. FT.
HOURS
SQ. FT.
HOURS