Page 53 - Demo

4700 SYSTEM: ULTRAPLEXTM
4700 System
ULTRAPLEXTM SD SL
Self-leveling seamless floor coating, designed to meet the electrostatic discharge requirements of a wide variety of industrial flooring needs.
» Designed for areas where electrostatic charge build-up hinders productivity (1 megohm to 1,000 megohms or 1.0 x 106 to 1.0 x 109 megohms) at 100 volts based on ASTM F150 test method
» Resistance to a variety of acids, alkalis, and solvents — Chemical resistance equal to 8200 System OverKote series
» Provides a wear surface for protection where conductive tile just isn’t enough
» Nonporous and of extreme high density — Resists gritting and traffic soil, will not support bacterial growth, will not hold odors and is easily mopped clean
VOC <160g/l RESISTANCE:
Chemical Abrasion Impact Mechanical
70 24
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE: DRY TIME: FOOT
FULL
Concrete
Smooth
90 mils / coat
70 sq. ft. / kit
70–90°F (21–32°C)
24 hours 72 hours
4700 System
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Difficult
Penetrating Prime
& SealTM Primer, UltraPlexTM ESD Primer
Screed Rake, Spike Roller
Institutional and electronics like clean rooms, hospitals, automated assembly areas, computer control rooms, semi- conductor and relay assembly areas, printing press areas and electronic manufacturing plants
For Color Swatches See Page 53
ULTRAPLEXTM SD S
SQ. FT.
MIMLIDLD–MODERATE MIMLIDLD–MODERATE MIMLIDLD–MODERATE MIMLIDLD–MODERATE
HOURS
A 100% solids epoxy designed to meet the static dissipative requirements of a wide variety of industrial flooring needs.
» Designed for areas where electrostatic charge build-up hinders productivity (1 megohm to 1,000 megohms or 1.0 x 106 to 1.0 x 109 megohms) at 100 volts based on ASTM F150 test method
» Splash and spill resistant to a variety of acids, alkalis, and solvents
» Provides a wear surface for protection where conductive tile just isn’t enough
» Easy maintenance — clean with a mop or hose
WELL SUITED FOR:
DETAILS
RECOMMENDED SURFACE: SURFACE FINISH:
DRY FILM THICKNESS: COVERAGE:
INSTALL TEMPERATURE:
DRY TIME: FOOT FULL
Concrete
Smooth
16 mils / coat
100 sq. ft. / kit 65–90°F (18–32°C)
24 hours 72 hours
APPLICATION
INSTALLATION DIFFICULTY: COMPANION PRODUCTS:
APPLICATION TOOLS:
Difficult
Penetrating Prime
& SealTM Primer, UltraPlexTM ESD Primer
Rubber Squeegee and High-Quality Roller
Institutional and electronics like clean rooms, hospitals, automated assembly areas, computer control rooms, semi- conductor and relay assembly areas, printing press areas and electronic manufacturing plants
For Color Swatches See Page 53
WELL SUITED FOR:
VOC <135g/l RESISTANCE:
Chemical Abrasion Impact Mechanical
100 24
MILD MILDMODERATE MILDMODERATE MILDMODERATE
SQ. FT.
HOURS
SEVERE
52