Page 8 - Catalog Label printers SQUIX

Technical data

 Standard  Option
Device type Material guide Left-aligned Centered
Type of print head 4.3 4.3 4 4 4.3 4.3 4 4
Printing method Thermal transfer – –   – –  
Direct thermal/thermal transfer   – –   – –
Printable resolution dpi 203 300 300 600 203 300 300 600
Print speed up to mm/s 250 250 300 150 250 250 300 150
Print width mm 104 108.4 105.7 105.7 104 108.4 105.7 105.7
Printable area Distance to locating edge when left-aligned mm 2.8 1.2 2.0 2.0 – – – –
when centered mm – Centered on material
Material
1)
On roll or fanfold: paper, cardboard,
plastics PET, PE, PP, PI, PVC, PU, acrylate, Tyvec  
On roll or reel: textile, pressed tubes, Smart Label – 
Labels Width 1) mm 20 - 116 4 - 110
Height 1) mm 6 - 2,000 4 - 2,000
Thickness mm 0.03 - 0.60 0.03 - 0.60
Liner material Width mm 24 - 120 9 - 114
Thickness mm 0.03 - 0.13 0.03 - 0.13
Continuous material Width mm 24 - 120 4 - 114
Thickness mm 0.05 - 0.50 0.05 - 0.50
Weight (cardboard) up to g/m 2 300 300
Pressed tube Width ready-for-use up to mm – 114
Width continuous mm – 4 - 85
Thickness up to mm – 1.1
Roll Outer diameter up to mm 205 205
Core diameter mm 38.1 - 100 38.1 - 100
Reel Outer diameter up to mm – 205
Core diameter mm – 38.1 - 76
Outer width mm – 11 - 114
Winding Outside or inside Outside or inside
Ribbon
2)
Ink side Outside or inside
Roll diameter up to mm 80
Core diameter mm 25.4
Variable length up to m 450
2)
Width up to mm 25 - 114
Internal rewinder with dispensing device
Outer diameter up to mm 142
Core diameter mm 38.1 - 40
Winding Outside
Printer sizes and weight
Width x Height x Depth mm 252 x 288 x 460
Weight kg 10
Label sensor with position indication
Gap sensor For label front edge or punch marks and end of material
Reflective sensor from below (optionally from top) For print mark front edge and end of material
Distance sensor to locating edge Left-aligned mm 5 - 60 –
from center to locating edge Centered mm – 0 - 55
Height of material passage Standard mm 2 2
Option mm 4 4
RFID
Write/read device HF ISO/IEC 15693, 13,56 MHz – 
UHF ISO/IEC 18000-6C/EPC Class 1 Gen 2 – 
Electronics
Processor 32 bit clock rate MHz 800
Main storage (RAM) MB 256
Data storage (IFFS) MB 50
Plug-in for SD card (SDHC, SDXC) up to GB 512
Battery for time and date, real-time clock 
Data storage when power turned off (e. g. serial numbers) 
Acoustic signal 
Interfaces
RS232C 1.200 to 230.400 baud/8 bit 
USB 2.0 Hi-speed Device for PC connection 
LPD, IPv4, IPv6, RawIP printing, DHCP, HTTP, FTP, SMTP, SNMP,
Ethernet 10/100/1000 Base-T
TIME, NTP, Zeroconf, SOAP web service
1 x USB host at the operation panel up to 500 mA For service key or USB stick
2 x USB host on the back of the device up to 500 mA For keyboard, barcode scanner, USB stick, Nano Bluetooth USB adapter
WLAN 802.11b, g, n, access point mode or station mode GHz 2,4 / 5 
Peripheral connection USB host, 24 DC 
Digital I/O with 8 in- and outputs Dispensing/basic device /
1) Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved.
2) Ribbon at least according to width of label material in order to avoid folding.
8