Page 208 - CRESTRON HOME OS-3
P. 208

Double

               To assign a quick action to a double button press (double tap), tap the Double button and then
               select a quick action.
































               Tap the gear button     next to the location button to configure the double tap settings for the
               keypad.

                    l Use System Settings: Tap the check box next to Use System Settings to use the delay that
                     is set by the system. For details, refer to Keypad Settings (on page 296).
                    l Wait For Double Tap: Available when Use System Settings is not checked. Tap the check
                     box next to Wait For Double Tap to enable the wait for double tap function. The Wait for
                     Double Tap function determines if the Crestron Home system triggers the Tap button
                     action or the Double Tap button action. The delay is the amount of time (in seconds) that
                     the system waits after a button press to determine if a subsequent button press is a
                     double tap. The values can be set between 0.2 and 1 second.

                     For example:

                           o Tap button action is set to route video to a bedroom.
                           o Double Tap button action is set to route audio to a bedroom.
                     When Wait for Double Tap is enabled:


                     NOTE: The Tap button action is not triggered if the button is pressed twice within the
                     delay time.

                           o A single button press will route video to the bedroom if the room is off (Tap button
                           action).






                208 • Crestron Home™ OS                                              Product Manual — Doc. 8525Z
   203   204   205   206   207   208   209   210   211   212   213