Page 254 - CRESTRON HOME OS-3

Configure a Scheduled Event

To configure a scheduled event, follow these steps:
l Enabled: Turn the scheduled event on or off. To turn a schedule event on, select the
Enabled check box.

NOTE: New scheduled events are turned off by default.

l Day of Week: Tap the appropriate check boxes above each day of the week to select the
days that the event will occur. A filled check box indicates that the event is scheduled to
occur on the associated day.

l : Schedule the event to occur at a specific time of day. Set the time using the provided
spinner menus.

l : Schedule the event to occur at a time relative to sunrise or sunset (calculated by date
and time zone). Select whether the event should occur at sunrise or sunset and then set
when the event should occur relative to the sunrise or sunset time.

NOTE: To adjust the default times for sunrise and sunset, navigate to Installer Settings >
System Configuration > System Settings, and then tap the wrench button on the
Current Times of Day panel. For more information, refer to Current Time and Date (on
page 268).

l Select Room Below: Select a room from the menu, and then select the scene(s) that will be
triggered by the event.

NOTE: Only rooms that contain scenes display on the Select Rooms Below menu. Any
room with a selected scene is shown with blue text on the Select Rooms Below menu.

Delete a Scheduled Event
To delete a scheduled event, follow these steps:

1. Select a scheduled event in the Scheduled Events menu.
2. Tap Delete next to the event name.

3. Tap OK.

To return to the previous screen, tap Back.

254 • Crestron Home™ OS Product Manual — Doc. 8525Z